Science Publications

Sign Up
Sign In
Submit
Current Research in Public Health
Cite This Article Share Download PDF XML
  1. Home
  2. Journals
  3. Current Research in Public Health
  4. Archive
  5. Volume 1, Issue 1, 2021
  6. Article
Article Open Access August 12, 2021

Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine

Amine, J. D 1, Sampson Chisa Owhor 2,* and Milkail Alhaji Abdulkareem 2
1
Department of Mechanical Engineering, University of Agriculture Makurdi, Benue State, Nigeria
2
Department of Mechanical Engineering, Federal University Wukari, Taraba State, Nigeria
Publihed in: Current Research in Public Health (Volume 1, Issue 1, 2021)
Page(s): 1-9
DOI: 10.31586/ojme.2021.010101
Received
July 01, 2021
Revised
August 01, 2021
Accepted
August 11, 2021
Published
August 12, 2021
Keywords
Block; Moulding Machine; Noise; Operator Vibration
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright: Copyright © The Author(s), 2021. Published by Scientific Publications
Article metrics
Views
800
Downloads
243

Cite This Article

APA Style
Amini, J. D. , Chisa, O. S. , & Alhaji, A. M. (2021). Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine. Current Research in Public Health, 1(1), 1-9. https://doi.org/10.31586/ojme.2021.010101
ACS Style
Amini, J. D. ; Chisa, O. S. ; Alhaji, A. M. Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine. Current Research in Public Health 2021 1(1), 1-9. https://doi.org/10.31586/ojme.2021.010101
Chicago/Turabian Style
Amini, J. D., Owhor Sampson Chisa, and Abdulkareem Milkail Alhaji. 2021. "Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine". Current Research in Public Health 1, no. 1: 1-9. https://doi.org/10.31586/ojme.2021.010101
AMA Style
Amini JD, Chisa OS, Alhaji AM. Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine. Current Research in Public Health. 2021; 1(1):1-9. https://doi.org/10.31586/ojme.2021.010101 
@Article{crph70,
AUTHOR = {Amini, J. D. and Chisa, Owhor Sampson and Alhaji, Abdulkareem Milkail},
TITLE = {Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine},
JOURNAL = {Current Research in Public Health},
VOLUME = {1},
YEAR = {2021},
NUMBER = {1},
PAGES = {1-9},
URL = {/10.31586/ojme-1-1-110.31586/ojme/1/1/1},
ISSN = {2831-5162},
DOI = {10.31586/ojme.2021.010101},
ABSTRACT = {High levels of occupational noise and vibration remain a problem in all regions of the world. In Nigeria, 12−15% of the workforce are exposed to these hazards by WHO, 2001. This research intends to achieve the following objectives; To assess the noise emitted during the moulding of various types of blocks, to determine the level of vibration induced to workers of block moulders during activities and to determine the effect of noise and vibration on workers. The following materials and equipment were used; QT40B manual block moulding machine, LM2-45 Mobile Block moulding Machine, Lister powered block moulding machine, QTJ4-40 block moulding machine using 9 and 6 inches Plates, Vibrometer and Noise monitor. The workers were exposed to noise levels above 75dB and vibration levels above 5ms-2 set as upper limit values in the Directive 44/EC from 2002 – on the Minimum Health and safety Requirements Regarding to Exposure of Workers to the Risk Arising from Physical Agents Vibration.},
}
%0 Journal Article
%A Amini, J. D.
%A Chisa, Owhor Sampson
%A Alhaji, Abdulkareem Milkail
%D 2021
%J Current Research in Public Health

%@ 2831-5162
%V 1
%N 1
%P 1-9

%T Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine
%M doi:10.31586/ojme.2021.010101
%U /10.31586/ojme-1-1-110.31586/ojme/1/1/1

TY  - JOUR
AU  - Amini, J. D.
AU  - Chisa, Owhor Sampson
AU  - Alhaji, Abdulkareem Milkail
TI  - Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine
T2  - Current Research in Public Health
PY  - 2021
VL  - 1
IS  - 1
SN  - 2831-5162
SP  - 1
EP  - 9
UR  - /10.31586/ojme-1-1-110.31586/ojme/1/1/1
AB  - High levels of occupational noise and vibration remain a problem in all regions of the world. In Nigeria, 12−15% of the workforce are exposed to these hazards by WHO, 2001. This research intends to achieve the following objectives; To assess the noise emitted during the moulding of various types of blocks, to determine the level of vibration induced to workers of block moulders during activities and to determine the effect of noise and vibration on workers. The following materials and equipment were used; QT40B manual block moulding machine, LM2-45 Mobile Block moulding Machine, Lister powered block moulding machine, QTJ4-40 block moulding machine using 9 and 6 inches Plates, Vibrometer and Noise monitor. The workers were exposed to noise levels above 75dB and vibration levels above 5ms-2 set as upper limit values in the Directive 44/EC from 2002 – on the Minimum Health and safety Requirements Regarding to Exposure of Workers to the Risk Arising from Physical Agents Vibration.
DO  - Evaluation and Analysis of Noise and Vibration Exposure Level on Operator of QT40B, QTJ4-40, Lister and LM2-45 Block Moulding Machine
TI  - 10.31586/ojme.2021.010101
ER  -