Articles

There have been various concerns about the environmental impact of construction works. This generates a need to take a more proactive approach in evaluating the environmental impacts of construction operations and further explore ways to reduce the environmental impacts. Enormous opportunities exist within the building industry to achieve a reduction in greenhouse gas emissions. The aim of the study is to develop a framework for the evaluation of improvement opportunities for environmental impact for onsite and offsite building construction works using life cycle assessment (LCA) and value-stream-mapping concepts. Various tools for LCA exist; however, there is a need for the development of an LCA framework and improvement opportunities that can be localized to various communities to evaluate improvement opportunities for building construction. This study conducts a review of methods to evaluate the LCA of buildings on local construction sites. A procedure for establishing improvement opportunities is also developed. Based on the author’s knowledge and experience, including site visits, using value stream mapping (VSM) techniques, a conceptual framework of the present state map and future state map of residential construction works was developed. The study presents a procedure for the evaluation of improvement opportunities for the environmental impacts of construction operations.

The building construction industry holds a crucial role in the reduction of greenhouse gas emissions globally. The targets for greenhouse gas emissions may not be achieved without a defined strategic plan to meet up with the set targets from various sectors of the economy. Recognizing the enormous potential that the building industry holds in contributing to global greenhouse gas GHG emission reduction, this study describes a framework on how optimization techniques can be used as a guide for emission reduction targets for the housing sector using illustrations of the onsite and offsite building construction industry. Given that some of the GHG gases are also sources of air pollution, this study includes a discussion on how the effort to address air pollution can be used to find a consensus towards addressing the concern about GHG emissions. This study presents procedures for simplified methods of estimation of GHG emissions that various municipalities around the globe can use to estimate and report the emissions from the building construction industry. The study presents a unifying strategy for emission management. The study also demonstrates how programming methods can be applied to GHG emissions management. The approach used in this study is transferable to other industries. The study recommends a unifying strategy for the management and control of emissions in the building construction industry. The study also recommends a coordinated effort in sharing best practices for emission control and management from all jurisdictions globally. In the effort to reduce global emission targets, further studies like this and its expansion is recommended for all sectors of the global economy. It is recommended that these studies should be followed by a concrete effort to achieve good implementation of sustainable emission reduction targets globally.

Life cycle assessment, LCA is one of the tools that is used to measure the environmental impacts of a process or an operation. Various studies have mentioned the benefits of mass timber in building construction. This study presents an evaluation of the LCA of certain mass timber in relation to concrete-based materials. Using Athena impact estimator for buildings, the study compared the results of an LCA study for a house that is designed with concrete beams, concrete columns, and concrete walls with brick in the envelope category (Material group 1) with those that are made with glulam beams, glulam columns, CLT walls with spruce wood bevel siding (Material group 2), and another building with LVL columns, LVL beams, CLT walls with spruce wood bevel siding (Material group 3). The results are in line with those that were reported by the majority of previous researchers. For the location that is being reviewed (Calgary, Alberta), the designs showed that construction with wood materials having mass timber components will have a better environmental performance than that for a building design with more concrete-based materials. The building design with more concrete-based material (group 1) showed 242% and 60% higher global warming and acidification potential respectively than the building with glulam beams and columns (material group 2). Except for ozone depletion potential, material group 2 (with glulam beams and columns) has a lower impact than material group 3 (with LVL/PSL beams and columns). The differences in impacts are more pronounced when the comparison is with design with more concrete-based products. This report further shows that LCA can be helpful during the preliminary design to evaluate the expected environmental impacts of the choice of different materials. This study recommends that material manufacturers and building contractors pay attention to LCA results to evaluate areas for continuous improvement.