Articles

<b>Objective:</b> The knowledge, attitudes, and practices of SUA students about the use of plastics containing endocrine disruptors were investigated in this study. <b>Methodology:</b> A study with 150 participants was conducted to assess individuals' knowledge about endocrine disruptors, attitudes, and plastic use practices. <b>Results:</b> The findings indicate that the participants possessed an average degree of knowledge 50.2 ± 3.85 with the main emphasis of awareness being generic concepts rather than specific substances. Regarding the potential health impacts of endocrine-disrupting chemicals present in plastics, respondents' attitudes ranged from fair to positive, with a mean score of 3.5 ±0.09 indicating a fair attitude overall. Conclusion: It is important to practice polite behavior and increase public awareness of safe plastic disposal methods. Surprising only 38.0% of the participants mentioned that they refrain from heating their food in plastic containers to reduce their exposure to plastics. Students' practices revealed a notable dependence on plastic products despite their awareness of the concerns surrounding endocrine disruptors, as most of them reported using plastic water bottles, plastic cups, and plastic bags almost always. Additionally, only 20.7% of the respondents consistently implemented strategies to prevent exposure to endocrine-disrupting chemicals. <b>Recommendation:</b> The study recommended increasing the use of cleaner plastic substitutes and improving educational programs to convert information into practical actions. Policies that encourage environmentally friendly behavior and raise public awareness of safe plastic disposal techniques should be put into practice.

Thanks to their interesting mechanical properties, recyclability and low production costs, plant fiber-reinforced composites, derived from agricultural residues, are of particular interest to both manufacturers and scientists looking to incorporate new environmentally-friendly and biodegradable materials to replace synthetic fibers, particularly glass fibers. The growing use of these composites in fields such as the automotive, construction and building industries, and soon in aeronautics, raises concerns about the reliability of the structures with which they are manufactured. This reliability must be guaranteed at the design stage, by a good knowledge of the properties of the material used. In this case, for composites, it is necessary to know the mechanical properties of their constituents, fibers and matrix, etc. In this context, this paper focuses firstly on the economic and industrial recovery of Kenaf (K) and Date Palm (DP) fibers, and secondly on their incorporation as a reinforcing element in cementitious matrix composites, for subsequent use in non-structural applications. This research highlights the development of cementitious matrix bio-composites reinforced with this type of fiber, based on Taguchi's statistical methodology, in order to minimize the cost and number of tests. The bio-composites developed are then mechanically characterized under static loading in compression and 3-point bending after a 30-day drying period.

Groundwater geochemistry refers to the general chemical properties of water, particularly groundwater. Precipitation, volatilization, oxidation/reduction, sorption/partition, and complexation are processes involved in the distribution and fate of organic molecules in water. Determining hydrogeochemical facies is a great help for determining relationships and similarities among the chemistry of waters in an aquifer. This study focused on the coastal aquifer of Tripoli (Lebanon) with Mio-Quaternary age. It is considered as a confined aquifer and an important hydraulic reserve for domestic water use in the region. Recently, it underwent an urban development that leads to an increase in water demand causing a decrease in the piezometric level and a high-risk of deterioration to water quality through seawater intrusion and anthropic pollution. To understand the origin of mineralization and the mechanism of water hydro-chemistry variation and to provide a vision to underground water recharge, this study aims to analyze the hydrodynamic, piezometric, and geochemical characteristics of the coastal aquifer. The fluctuation of physicochemical parameters for cool and warm seasons has been studied and monitored for 16 coastal wells during April, May, and June 2020. Results were interpreted by using a statistical analysis called Principal Components Analysis (PCA). Cartographic of groundwater levels and concentrations for nitrate, chloride, sulphate ions, the ratio sulphate/chloride were determined by using SUFFER8 software. It can be noticed that the Mio-Quaternary formation at Tripoli consists of thick sedimentary sandstones and conglomerates with argillaceous roots, which provide significantly high permeability characteristics. It is mainly recharged from precipitations through karstic formations. Chemical analysis shows that bicarbonate ions (HCO₃^-), characterized by dissolution of carbonate rocks from geological upstream formations of Tripoli, means that the aquifer is subjected to intensive recharge of fresh water and snow melting making a hydrostatic equilibrium facing marine intrusion [1]. High contents of chloride and Sodium are due to anthropic contamination or seawater intrusion. However, Magnesium ion concentration assures this intrusion. Meanwhile, nitrates, sulfates and phosphorus high concentrations are related to wastewater leakage or agricultural activities [2].

Chemical solvents are commonly used to prevent microbial growth; dangerous to human health and have limited antibacterial properties. On the other hand, Nanoparticles made of metallic elements (such as copper, silver, and gold) have several uses in the field of biotechnology<b>. </b>Silver nanoparticles are more efficient in their antimicrobial, antibacterial, anti-inflammatory and anti-cancer properties. The current study aimed to determine the green synthesis of silver nanoparticles and their antibacterial activity from the aqueous extracts of leaves of <i>Couroupita</i><i> </i><i>guianensis</i><i>, </i><i>Punica</i><i> </i><i>granatum</i><i>, </i><i>Vitex</i><i> </i><i>negundo</i><i>, </i><i>Cirtrus</i><i> maxima. </i>AgNPs of plant extracts were prepared using silver nitrate with the respective plant extract. Then they were characterized by FTIR analysis. The respective functional groups in the synthesized silver nanoparticles were confirmed with FTIR Spectra. The antibacterial activities of the synthesized nanoparticle extract were observed by zone of inhibition. From the results, the nanoparticles synthesized from the plants extract could pave a way to formulate a drug to treat microbial infection.

The study sought to investigate the Physical Properties of Fabrics: Chemical Compositions of Selected Detergents on Colourfastness of GTP Wax Print and ATL Wax Print (Indigo) in Ghana. A 3×2×2 factorial experiment which includes three washing cycles, the two detergents and two fabrics types were used or the study. A total of 146 specimens were cut randomly from along the warp and weft grain directions of ATL and GTP wax prints and subjected to washing and breaking at the laboratory using standard equipment. The data was analysed using Microsoft Excel 2007 version and the results were presented using means and percentage tables. One-way analysis of variance (Anova) was used to test the hypotheses formulated. The study revealed that there was no significant difference in the tensile strength between GTP and ATL wax prints after undergoing three washing cycles with Omo multiactive and Ariel enzymax. The degrading effect in terms of loss of tensile strength of Ariel enzymax on both wax prints was greater than that of Omo multiactive. There was no significant difference in the colour fastness between ATL and GTP wax prints after undergoing three washing cycles each with Ariel enzymax and Omo multiactive. It is recommended that both GTP and ATL fabric manufacturers should pay particular attention to the physical properties (such as thread count, fabric weight and weave type) when purchasing grey goods for further processing of their products. It is also recommended that, Ghana Standards Authority should make it compulsory for the manufacturers of washing detergents to indicate the correct chemical composition of their products on the packages.

The present work describes the geometry and electronic structures of liquid crystals of azoxybenzene group and their reactivity with respect to molecular properties: total energy, ionization potential, electron affinity, HOMO energy, LUMO energy, electronegativity, hardness and dipole moment. Literature shows that mesomorphism depends particularly on the nature of terminal groups and their linkages with parent molecule. And thus, substitution of terminal groups can help to fine tune the liquid crystal behavior and also their applications. In this work the effect of four terminal groups of same and diverse nature has been studied. For the study, the molecular modeling and geometry optimization of the compounds have been performed on workspace program of CAChe Pro 5.04 software of Fujitsu using DFT method.