Articles

There have been various concerns about the environmental impact of construction works. This generates a need to take a more proactive approach in evaluating the environmental impacts of construction operations and further explore ways to reduce the environmental impacts. Enormous opportunities exist within the building industry to achieve a reduction in greenhouse gas emissions. The aim of the study is to develop a framework for the evaluation of improvement opportunities for environmental impact for onsite and offsite building construction works using life cycle assessment (LCA) and value-stream-mapping concepts. Various tools for LCA exist; however, there is a need for the development of an LCA framework and improvement opportunities that can be localized to various communities to evaluate improvement opportunities for building construction. This study conducts a review of methods to evaluate the LCA of buildings on local construction sites. A procedure for establishing improvement opportunities is also developed. Based on the author’s knowledge and experience, including site visits, using value stream mapping (VSM) techniques, a conceptual framework of the present state map and future state map of residential construction works was developed. The study presents a procedure for the evaluation of improvement opportunities for the environmental impacts of construction operations.

The decision to choose between onsite and offsite construction is important in the effort toward sustainable construction. Offsite construction is often promoted as an environmentally friendly approach to construction operations. However, previous studies have shown that there is a lack of clarity on the environmental trade-offs between onsite and offsite construction. Factors that can affect the decision to build onsite or offsite include the availability of a local offsite manufacturing facility, the distance of the offsite factory to the final place of use, the proximity of the site to the local supply of material and labor, etc. This study provides a framework to apply the system dynamic modeling technique to evaluate how various factors can affect the environmental impact of the building construction phase (for onsite or offsite construction methods). The system dynamic model (using Vensim software) that was developed provides a platform that allows users to input variables such as the distance that is expected for transportation of labor, material, and equipment to both the onsite facility and the offsite construction location, factors associated with the use of equipment for construction, the distance needed for transportation of building panels or modules from the offsite facility to the final site, etc. Among other things, the model showed that an increase in the distance from the offsite yard to the final construction site increases the total impacts of transportation of completed modules. An increase in the number of trips for the transportation of material to the onsite construction location increases the total impact of onsite construction. In terms of the environmental impact of construction, none of the two methods of construction gives an absolute superiority over the other. The environmental performance of offsite and onsite depends on various associated factors. It is recommended that building practitioners review various factors that are peculiar to their projects to make an informed decision on the best construction methods.

Life cycle assessment, LCA is one of the tools that is used to measure the environmental impacts of a process or an operation. Various studies have mentioned the benefits of mass timber in building construction. This study presents an evaluation of the LCA of certain mass timber in relation to concrete-based materials. Using Athena impact estimator for buildings, the study compared the results of an LCA study for a house that is designed with concrete beams, concrete columns, and concrete walls with brick in the envelope category (Material group 1) with those that are made with glulam beams, glulam columns, CLT walls with spruce wood bevel siding (Material group 2), and another building with LVL columns, LVL beams, CLT walls with spruce wood bevel siding (Material group 3). The results are in line with those that were reported by the majority of previous researchers. For the location that is being reviewed (Calgary, Alberta), the designs showed that construction with wood materials having mass timber components will have a better environmental performance than that for a building design with more concrete-based materials. The building design with more concrete-based material (group 1) showed 242% and 60% higher global warming and acidification potential respectively than the building with glulam beams and columns (material group 2). Except for ozone depletion potential, material group 2 (with glulam beams and columns) has a lower impact than material group 3 (with LVL/PSL beams and columns). The differences in impacts are more pronounced when the comparison is with design with more concrete-based products. This report further shows that LCA can be helpful during the preliminary design to evaluate the expected environmental impacts of the choice of different materials. This study recommends that material manufacturers and building contractors pay attention to LCA results to evaluate areas for continuous improvement.

The equipment used in the construction industry is usually associated with a high impact on the environment. Although sustainable design has shown to be a main player among the initiatives focused on reducing environmental impact, it has been driven by the workers and processes, leaving the equipment endeavors in more restrictive and later stages. The equipment industry has been a constant target of environmental standards and economic pressure, but the increasing technological development allows it to respond to sustainability and safety expectations while enhancing its performance. However, there are still several limitations that lead this sector to be one of the last to reach upgrading levels in terms of development. A study identified some gaps in the equipment design that require a greater effort to effectively support the workers and companies towards sustainable construction. This chapter is based on a study aiming to understand the consolidated knowledge of technologically sustainable equipment design and to identify the challenges left for its full development. The findings support the development of innovative eco-friendly equipment, taking into consideration sustainable materials and product guidelines, as well as green economy initiatives. It also supports complex system approaches and safety by design specificities to establish a corporate knowledge of sustainable equipment and align it with the new regulations of the construction industry. The chapter introduces the context of construction equipment in terms of new challenges when faced with the need to provide construction work with a greater capacity for safety, from an environmental and energy efficiency perspective, and within the paradigm of sustainability. Then, it presents the concept of sustainable equipment considering its principles, followed by a characterization of the agents involved in its life cycle.