Articles

A phytosociological review is carried out of the pine forest formations on the islands of Cuba and Hispaniola (Caribbean), due to the diversity of soils and environments. We collected 10 plant associations belonging to the class <i>Byrsonimo-Pinetea caribaea</i> growing on siliceous, calcareous and sandy substrates and 21 associations on special, serpentine and ophite substrates and on ultramafic rocks belonging to the class <i>Caseario</i><i> crassinervis</i><i>-Pinetea cubensis, </i>exclusive to Cuba; while the association of pine forests on serpentines in Hispaniola is included in the class <i>Phyllantho orbicularis-Neobracetea valenzuelanae </i>with a Caribbean distribution. The comparative phytosociological and statistical study reveals phytosociological anomalies in the inclusion of various syntaxa, and in the description of other syntaxa according to the International Code of Phytosociological Nomenclature (ICPN). We therefore propose a change in status for several of the subassociations described: subass. <i>ilicetosum repandae</i>: syn. var. con <i>Ilex repanda</i>; subass. <i>schmidtottietosum shaferi</i>: syn. var. with <i>Schmidtottia shaferi</i>; subass. <i>acrosynanthetosum trachyphylli</i>: syn. var. with <i>Acrosynanthus trachyphyllus</i>; subass. <i>psychotrietosum grandis</i>: var. con <i>Psychotria grandis</i>; subass. <i>notodonetosum roigii</i>: syn. var. with <i>Notodon roigii</i>. We also propose a <i>nomen novum</i>: <i>jaquinietosum oxhyphyllae</i> Reyes &#x26; Acosta 2012 ex Cano et al<i>. hoc loco</i>.

Cellulose nanofiber is an eco-friendly nanomaterial used for fabricating various functional materials. It is an alternative for synthetic plastic and other petroleum derived materials. Due to demand of CNF film, fast and rapid method for fabrication of CNF film is required. A new method on spray coating to prepare smooth cellulose nanofiber (CNF) films was developed. In this method, spraying CNF suspension onto a smooth and polished metal surface was carried out and then allowed the spray coated wet film to dry in air under standard laboratory conditions. Spraying has notable advantages such as contour coating and contactless coating with the base substrate. The basis weight and thickness of the CNF film is tailorable by adjusting CNF suspension in spraying process. CNF film prepared via spray coating has unique two-sided surface roughness with the surface in contact with the base substrate or metal side much smoother than the air-contact side. The surface roughness is one of the controlling parameter in the application of the CNF film as a substrate for flexible and printed electronics. The RMS roughness of the two surfaces investigated by Optical Profilometry [OP] was found to be 2087 nm on the rough side and 389 nm on the spray coated side, respectively. The spray coated CNF film has ultra-high smoothness on the side exposed to the polished stainless steel surface. The factors including the size of cellulose fibrils and surface smoothness of base surface that control the roughness of the film are currently being investigated and will be discussed in this chapter. The surface smoothness requirements for substrate applications in flexible and printed electronics will be discussed.

Al-Dawaimah is an ancient Canaanite Palestinian village, occupied in 1948 by Israel, and belongs to inframediterranean to thermomediterranean thermotype and arid, semi-arid, and dry ombrotype. The study presents, a region rich in many plant vascular, and it is part of the Palestinian coast, North Africa, the Negev and the Sinai desert, in addition to the mountainous hills of Palestine located west of the Hebron, Jordan River and the Dead Sea. The objective is to identify and update the flora and vegetation in the area of Al-Dawaimah and its neighboring areas in west Hebron of Palestine. Methodology: More than 270 plant specimens have been taken from Al-Dawaimah and surroundings areas, using Braun-Blanquet, Van der Maarel and Salvador River Martinez methods to study the flora, and phytosociological plants, and 214 x 10 plants plots distributed in area were studied. Result and discussion: Three different plant communities were identified, in different environments between arid, dry- subhumid ombrotype and infra-thermomediterranean thermotype, and different soils as (carbon substrates as brown ruinsenas and terra rossa lands, limestone and others), where more than 214 species of plants have been found, of which 45 (20.02%) are endemic species, and in Raunkiaer's life system, trees represent were, (86; 40.18% trees), (34; 15.88% shrubs), (51; 23.83% chamaephytes), (10; 4.67% geophytes), (16; 7.47% phanerophytes), and (12; 6.54% hemicryptophytes). Conclusion: In Al-Dawaimah area<b>,</b> syntaxonomical performance of these associations are: <i>Quercetalia ilicis</i> Br.-Bl. ex Molinier 1934. <i>Rhamno lycioidis-Quercion cocciferae</i> Rivas Goday ex Rivas-Martinez 1975. 1. <i>Rhamnus palaestinae- Quercetum calliprini</i> ass. nova., <i>Pistacio</i> <i>lentisci -Rhamnetalia alaterni</i> Rivas-Martínez 1975. 2. <i>Ceratonio siliquae -Pistacetum lentisci</i> ass. nova., <i>Junipero</i> <i>phoeniceae- Pinon acutisquamae</i> A.V. Pérez et Cabezudo in A.V. Pérez et al. 1988 corr. Rivas-Martinez. et al. 2002. <i>Pinetalia halepensis</i> Biondi et al. 2014. 3. <i>Junipero phoeniceae- Pinetum halepensis</i> ass. nova.

Paper is widely used in packaging applications and is biodegradable and therefore perfectly safe as green packaging wrap for the environment. The hydrophilic nature of cellulose fibrils limits the water vapour and oxygen barrier properties of paper. To mitigate these limitations, paper is often associated with other materials, such as plastics, wax and aluminum, for achieving their good barrier properties. However, these materials suffer from serious environmental issues, as difficult and inefficient to recycle. Recently, cellulose nanofibre (CNF) based materials has been considered as an alternative to produce eco-friendly barrier materials. Existing techniques to prepare cellulose nanofibre films/sheets/composites/ laminates on the paper substrates are commercially not feasible and expensive. Therefore, other cost effective and readily implementable methodologies are required to achieve cellulose nanofibre barrier layers. In the present report, a novel approach is developed using spray coating technique to produce CNF materials with excellent barrier properties. Among many coating techniques, the spray coating has many advantages such as the production of even coating surface on the base sheet and contactless coating with the substrate. A laboratory scale spray coating of cellulose nanofibre suspension on a paper substrate was developed. When the cellulose nanofibre suspension concentration was varied from 0.5 to 1.5 wt. %, coat weight is increased from 2.9±0.7 to 29.3±6.9 g/m². As a result, the air permeability of composite was decreased 0.78±0.17 to <0.0030 µm/Pa.s. Scanning electron microscopy studies of spray coated CNF laminates on the paper confirms that the surface pores in the paper substrates are filled with sprayed cellulose nanofibre and forms a continuous film on the surface of the substrate. These are the probable reasons for the reduction of air permeability of composites. A rapid preparation technique to prepare free standing cellulose nanofibre films/sheets was also developed using a bench scale spray coating system. Cellulose nanofibre suspension with concentration ranging from 1 to 2 wt% was sprayed onto a stainless steel plate, which is moving on a conveyor at a velocity of 0.32 cm/sec and then air dried. The basis weight of produced cellulose nanofibre films is varied from 52.8±7.4 to 193.1±3.4 g/m². Processing time taken to prepare films was approximately 1.0 min, which is much less than processing times reported in the previous literature. Thus, the significant reduction in preparation time for producing the cellulose nanofibre sheet recommends that this spray coating technique can be utilized for the development of a scalable process for the fabrication of various cellulose based nanocomposite. Therefore, the laboratory scale spray coating confirms that the spraying could provide a platform for development of films/sheets/nanocomposite and also a CNF barrier layer on the base sheet. The future work is the development of a continuous spray coating of cellulose nanofibre on the base sheet and evaluation of mechanical and barrier properties spray coated barrier layers on the base sheet.

Cellulose nanofibre (CNF) is a biorenewable and biodegradable nanomaterial and belongs to fibrous based carbohydrate polymers applied in the fabrication of various functional materials such as coating, nanocomposite, flexible electronics substrates and biomedical devices. Recently, CNF can be used as coating material for papers and paperboards to replace synthetic plastics, wax and aluminum foil which is not recyclable and also a threat to environment. The coating of CNF on the paper substrates enhances their barrier and mechanical properties. Spray coating is a newly proposed technique to deposit CNF on the paper and produce CNF laminates on the surface of paper to block their surface pores and allowing improve their barrier performance against water vapor, air and oxygen. Various concentration of CNF was sprayed on various paper substrates such as newsprint papers, packaging paper (brown paper) and blotting papers. The air permeability of CNF laminated paper substrates is completely impermeable against air. The SEM micrograph reveals that the surface pores in the paper substrates are filled with sprayed CNF and formed a barrier film as a laminate on the paper substrates. As a result, a considerable drop in the air permeability of the paper substrates was observed. Given this correspondence, spraying of cellulose nanofiber on the paper substrates allows the improvement of barrier performance and proof of concept for coating CNF on the paper and paperboard.

Major depressive disorder is characterized, among other symptoms, by depressed mood and anhedonia associated with a high rate of suicidal ideation. In recent years, research has shown reduced expression of the brain-derived neurotrophic factor (BDNF) in limbic areas of individuals with depression. This reduction of BDNF is reversed by antidepressants in animal models of stress. Stress is one of the main triggers of mood disorders such as depression. Also, administration of BDNF increases the number of serotonergic fibers and serotonergic innervation, indicating an increase of serotonin in the synaptic cleft by this neurotrophin. Thus, BDNF appears to be one of the targets of antidepressant drugs for the increase of monoamines and remission of symptoms of major depression. The purpose of this review was to show the evidence that indicates BDNF as a molecular substrate for vulnerability to depression and the response of this substrate to the antidepressants.

In Central Africa, mushrooms are critically important non-timber forest products (NTFPs), both nutritionally and economically. A strain of edible and medicinal lignicolous fungus, <i>Pleurotus</i> tuber-regium (Rumph. ex Fr.) Singer 1951 (strain 190212), isolated from tissue (sclerotia), on PDA medium, was tested on corn grain and sawdust seedling substrates and on palm oil male inflorescence (<i>Elaeis guineensis</i> Jacq.), ground corn (<i>Zea mays</i> L) stalks and grass (<i>Paspalum notatum</i> L) soaked for 24 hrs then drained for 24 hours, and unsoaked ground corn (<i>Zea mays</i> L) stalks. The highest mycelial growth rate recorded was about 0.9 cm on the PDA medium; 5.97 cm on the corn-based seedling medium and 11.95 cm on the sawdust-based seedling medium. Total mycelial invasion on the PDA medium was observed on day 10, day 14 on the corn-based seedling medium, and day 24 on the sawdust-based seedling medium. The onset of mycelial invasion was noticeable on day 3 of seeding for all treatments T<SUB>0</SUB> (control), T<SUB>1</SUB> (Final substrate based on soaked ground corn stalks), T<SUB>2</SUB> (Final substrate based on unsoaked ground corn stalks), and T<SUB>3</SUB> (Final substrate based on turf). Total invasion of mycelium was obtained at day 15 of incubation for treatments T<SUB>1</SUB> and T<SUB>2</SUB>, at day 18 for treatment T3 and at day 24 for treatment T0. The results obtained on treatments T<SUB>1</SUB> and T<SUB>2</SUB> respectively (14.95±3.12% and 15.65±1.06%) of the maize stalk substrate, lead us to believe that the strain 190212 of <i>Pleurotus tuber-regium</i> species used has adapted and requires an improvement of the medium with nitrogen-rich additives such as soybean meal. This could achieve the theoretical yield of 20% or more, according to which a substrate can be considered better in producing sporophores.