During the past few decades, many of the synthetic chemicals are able to produce nanoparticles and nanoclusters, although these chemicals primarily act as reducing and capping agents, they are very toxic and hazardous and make the nanoparticles biologically incompatible. Thus there is need for green chemistry that includes a clean, non-toxic and environmental friendly method of nanoparticles synthesis. Cobalt, iron and copper nanoparticles were synthesized using the stem-bark extract of khayasenegalensis (mahogany) where cobalt chloride (CoCl₂ 6H₂O), ferric chloride (FeCl₂), and copper sulphate (CuSO₄ H₂O) were used as the metal precursor respectively. The change in color from light brown to dark brown indicates the formation of cobalt nanoparticles, from light brown to dark green indicates the formation of copper nanoparticles and also the change in color from light brown to a dark color indicates formation of iron nanoparticles. The nanoparticles were further characterized using UV visible spectroscopy, FTIR, and SEM. The UV result for CoNPs showed the highest peak at 500nm and both FeNPs and CuNPs showed the highest peak at 300nm. The FTIR results for all the nanoparticles showed the presence of Alkaloids and triterpenes. Also the SEM result showed spherical granular, partially dispersed and monodispersed morphology for CoNPs, FeNPs and CuNPs respectively. Moreover, the antibacterial activity of the synthesized NPs when tested against two gram positive bacteria and two gram negative bacteria was evaluated and good results were obtained. The antifungal activity when tested against two fungi showed a very good result.

Magnetic iron nanoparticles (Fe₃O₄) were synthesized and characterized using Fourier Transformed Infrared ((FT-IR), UV-Visible spectrophotometer, Scanned Electron Microscopy (SEM) equipped with an Energy Dispersive X-ray spectrometer (EDX), and X-ray Diffraction (XRD). The synthesized nano catalyst was used in the transesterification of mahogany seed oil with methanol. The optimized reaction conditions gave a reaction yield of 88% at a catalyst concentration of 1.5% wt., a volume ratio of methanol to oil of 5:1, a reaction temperature of 60 °C, and a reaction time of 120 minutes. The Fe₃O₄ nanoparticles was regenerated from the mixture and reused for various circles by applying the optimum conditions obtained during the present study. The results showed that the biodiesel yield decreased by increasing the number of cycles when the regenerated catalyst was used. However, good conversion (81.9%) was obtained up to the 5th cycles. The elemental analysis of the synthesized magnetic iron nanoparticles Fe₃O₄) revealed the highest proportion of iron with 64.37 and 74.40% for atomic and weight concentration respectively, followed by oxygen with 34.27 and 24.50% for atomic and weight concentrations respectively. It could be concluded that the synthesized nano catalyst would serve as an excellent catalyst for the transesterification of vegetable oils.