Silver nanoparticles (Ag⁺NPs) contamination in the environment is a serious concern. This study investigated selected heavy metal (Ag⁺, Cd^2+, Cr²⁺ and Pb²⁺) concentrations at different sampling points to assess the risk to human health (infants, children, and adults). To do this, an enclosed area (laboratory) of 12.6 m X 8.5 m (107.1 m²) was clearly marked at different coded distances of S1, S2, S3, and S4 representing 2, 4, 6, and 8 m, while unpolluted atmosphere at 50 m away without Ag⁺NPs served as the control (S5). The silver fireworks were allowed to burn for an approximate 00h03m30s at each sampling points using a high-volume air sampler mounted at the Environmental Engineering Departmental Laboratory, Rivers State University, with windows and doors closed to simulate indoor conditions. Samples were digested using a mixture of analytical-grade nitric acid, analytical-grade hydrochloric acid and analyzed to evaluate the levels of heavy metals by atomic absorption spectrophotometry. The Ag⁺ result at S1 shows 30,000 µg/cm³, S2 was 29,000 µg/cm³, while S3 was 28000 µg/cm³ and then S4 was 13,000 µg/cm³. These results exceeded the permissible values of the United States National Ambient Air Concentration for rural, urban and industrial areas (0.0005, 0.004 and 0.6 µg/cm³, respectively). The result for the control (S5) (0.037 µg/cm³) was within the maximum allowable value. Results from other heavy metals such as Cd were 1000, 743, 401, 153, 0.001 µg/cm³, Cr was 5000, 4000, 3729, 2960, 0.002 µg/cm³, Pb was 0.048, 0.041, 0.035, 0.034 and 0.01, µg/cm³, respectively. However, higher values of Ag⁺, Cd, and Cr indicated a higher propensity for the metals to be toxic (bioavailable). In addition, the assessment of the potential health risk posed by these metals proved contaminated and harmful. Visitors recorded high values in exposure concentration (EC) and low values in average daily dose (ADD).

Foods rich in phytochemicals are well recognized for their role in the prevention of chronic disease development, in addition to fulfilling the nutrient requirements. However, different processing methods employed during preparation may affect their levels and functionality as they are sensitive to different processing parameters such as temperature and light. This study aimed to evaluate the effects of three common processing methods; boiling, fermentation, and drying (sun and solar drying, with and without blanching), on total phenolic content and total flavonoid content in cassava (Manhot esculenta Crantz), black jack (Bidens pilosa) and bitter lettuce leaves (Launaea cornuta) grown in Mkuranga District in the Eastern part of Tanzania. Total phenolic content and total flavonoid content were analyzed by using the spectrophotometric method with the use of Folin-Ciocalteu and Aluminum Chloride reagents, respectively. Total phenolic content ranged from 0.9±0.14 to 85.7 ± 0.56 mg Gallic Acid Equivalent (GAE)/100g and flavonoids ranged from 0.03±0.00 to 3.9±0.03 mg/100g across the treatments. Both parameters were adversely affected by fermentation and boiling, while solar and sun drying only reduced the flavonoid content. Results showed that direct solar and sun drying appear to be effective processing methods, for the retention and maintenance of total phenolic content in all samples while, none proved to be effective for flavonoid content.

A diagnosis of the current state of the crops is made regarding the control of weeds, use of pesticides, fungicides; with an assessment of the state of the plant covers in the crop, and its control by different types of herbicides, and we detected a high loss of biological diversity; and some of these compounds are mentioned due to their high toxicity. Similarly, the use of pesticides and fungicides is discussed due to their repercussions on health. In order to avoid the unhealthiness caused by the applications of these products, phytosanitary and educational control strategies are proposed; promoting the inspection of fruit and vegetable markets, and modifying the contents in higher professional and university education. To this end, we propose an active teaching methodology, through which the student acquires skills and responsibility for the use of chemical agents in agriculture, which serves to prevent the entry of these contaminants into the food chain. Of the different polluting chemical agents, in the case of herbicides we highlight Oxyfluorfen and Glyphosate with high toxicity and whose consumption is very high. In the case of pesticides and fungicides, among others are Organochlorine compounds, which have been detected in blood, and Carbon Tetrachloride and Chloroform, considered potent hepatotoxic and neurotoxic. The basic objective of this study is the awareness and acquisition of knowledge by future teachers about polluting agents, which will subsequently have an impact on society.

Practice guidelines recommend fixed combinations of calcipotriol, a topical vitamin D analogue, and betamethasone dipropionate, a high potency corticosteroid, as first line topical treatment for mild to moderate plaque psoriasis of the body and scalp. A new foaming lotion for treatment of Psoriasis was developed and patented by the Spanish Ministry of Industry, Trade and Tourism (Invention patent reference number 202030824). The foaming lotion is composed of clobetasol, papaverine hydrochloride, spironolactone, milk-peptide-complex and propylene glycol. Three cases with moderate Psoriasis aged 34, 36 and 66 years old were treated with our new foaming lotion for 7-8 days. The three patients reported important improvement in the itching sensations and remission of the scaled lesions. Before and after application of the new foaming lotion, Psoriasis Area Severity Index (PASI) scores improved in the first patient from 24.3 to 1.8, in the second patient from 26.1 to 1.8, and in the third patient from 27 to 1.8. Our results show the short-term effectiveness of the new foaming lotion in treating moderate and extensive Psoriasis. Long follow-up is needed to evaluate the remission period of Psoriasis and possible side effects of the new topical treatment.

This study investigated adolescent students‟ knowledge of sexually transmitted infections (STIs) in eastern region schools for the deaf in Ghana. A descriptive survey design was used for the study. The researchers used HIV- The knowledge Questionnaire to assess the knowledge of respondents on STIs. Stratified sampling and simple random sampling techniques were employed. Proportional representation was used to select a sample of ninety-five (95) adolescent students with deafness from JHS2 and JHS3 between the ages of 13 and 24 years. Data were analyzed descriptively into frequencies and percentages. The results of the study indicated that the students knew of some of the types of STIs such as Gonorrhea, Syphilis, and HIV/AIDS. They, however, had inadequate knowledge of STIs such as Hepatitis B and Chlamydia.

During the past few decades, many of the synthetic chemicals are able to produce nanoparticles and nanoclusters, although these chemicals primarily act as reducing and capping agents, they are very toxic and hazardous and make the nanoparticles biologically incompatible. Thus there is need for green chemistry that includes a clean, non-toxic and environmental friendly method of nanoparticles synthesis. Cobalt, iron and copper nanoparticles were synthesized using the stem-bark extract of khayasenegalensis (mahogany) where cobalt chloride (CoCl₂ 6H₂O), ferric chloride (FeCl₂), and copper sulphate (CuSO₄ H₂O) were used as the metal precursor respectively. The change in color from light brown to dark brown indicates the formation of cobalt nanoparticles, from light brown to dark green indicates the formation of copper nanoparticles and also the change in color from light brown to a dark color indicates formation of iron nanoparticles. The nanoparticles were further characterized using UV visible spectroscopy, FTIR, and SEM. The UV result for CoNPs showed the highest peak at 500nm and both FeNPs and CuNPs showed the highest peak at 300nm. The FTIR results for all the nanoparticles showed the presence of Alkaloids and triterpenes. Also the SEM result showed spherical granular, partially dispersed and monodispersed morphology for CoNPs, FeNPs and CuNPs respectively. Moreover, the antibacterial activity of the synthesized NPs when tested against two gram positive bacteria and two gram negative bacteria was evaluated and good results were obtained. The antifungal activity when tested against two fungi showed a very good result.

Polychlorinated biphenyls (PCBs) are important class of persist organic pollutants that were used as a component of paints especially in printings, as plastificator of plastics and insulating materials in transformers and capacitors, heat transfer fluids, additives in hydraulic fluids in vacuum and turbine pumps. There is always a need to establish reliable procedures for predicting the bioconcentration potential of chemicals from the knowledge of their molecular structure, or from readily measurable properties of the substance. Hence, correlation and prediction of biococentration factors (BCFs) based on λ_max and vibration frequencies of various bonds viz υ(C-H) and υ(C=C) of biphenyl and its fifty-seven derivatives have been made. For the study, the molecular modeling and geometry optimization of the PCBs have been performed on workspace program of CAChe Pro 5.04 software of Fujitsu using DFT method. UV-visible spectra for each compound were created by electron transition between molecular orbitals as electromagnetic radiation in the visible and ultraviolet (UV-visible) region is absorbed by the molecule. The energies of excited electronic states were computed quantum mechanically. IR spectra of transitions for each compound were created by coordinated motions of the atoms as electromagnetic radiation in the infrared region is absorbed by the molecule. The force necessary to distort the molecule was computed quantum mechanically from its equilibrium geometry and thus frequency of vibrational transitions was predicted. Project Leader Program associated with CAChe has been used for multiple linear regression (MLR) analysis using above spectroscopic data as independent variables and BCFs of PCBs as dependent variables. The reliability of correlation and predicting ability of the MLR equations (models) are judged by R², R²_adj, se, q²_L10O and F values. This study reflected clearly that UV and IR spectroscopic data can be used to predict BCFs of a large number of related compounds within limited time without any difficulty.

Effective infection control requires a close fit between the mask and face to minimize gaps. This study investigated whether surgical mask performance varies with face shape and mask size. Three facial models were 3D-printed using head-related transfer function data. Two mask sizes were tested on each model, and 3D measurements were taken at five facial points: the nose, cheeks, and chin to assess mask-to-face gaps. To simulate droplet emission, an aqueous sodium chloride solution was released from a pseudo-oral cavity in the models, and air leakage was measured using a mask-fitting tester. A two-way analysis of variance (ANOVA) was used to examine the effects of face and mask size on leakage. Small face models showed significantly higher leakage than medium and large ones (p < 0.001), and S-sized masks leaked more than M-sized masks regardless of face size (p = 0.038). Linear regression showed a positive correlation between chin gaps and leakage when using S-sized masks (p < 0.05). These results suggest that medium-sized masks offer better overall performance. However, for small faces, fit—especially at the chin, requires particular attention.

Central line-associated bloodstream infections (CLABSIs) are important hospital-acquired infections that are related to increased mortality in cardiac intensive care units (CICUs). To determine the risk factors for CLABSIs, a case-control study was conducted in the CICU of our hospital. Emergency surgery (odds ratio: 9.6, 95% confidence interval: 1.633-56.926) was the strongest risk factor comparing the case group (n=11) to the control group (n=22). In addition, the indwelling period was significantly longer in the case group than in the control group (median 9 days versus 7 days, p=0.004). An intervention for the insertion of central lines was then started, with 1) thorough use of chlorhexidine-impregnated dressings (also known as chlorhexidine patches, CHG patches) in the insertion of central lines before emergency surgery, and 2) exchange of the central line 7 days after emergency surgery. After the intervention, the CLABSI incidence rate decreased from 6.8 to 0.8/1,000 device-days. These data suggest the usefulness of CHG patches and the importance of the early exchange of central lines in the CICU in patients following emergency surgery.