Objective: To identify and evaluate the main functional assessment tools applied in the postoperative monitoring of patients undergoing total knee arthroplasty (TKA), and to synthesize the functional outcomes reported through these instruments in the current scientific literature. Methodology: A structured review was conducted following PRISMA 2020 guidelines. Thirty-one peer-reviewed studies were selected through a targeted manual search based on predefined eligibility criteria. Included studies evaluated functional recovery following TKA using validated outcome measures such as the WOMAC, KSS, KOOS, IKDC, SF-36, and SANE. Data extraction focused on the instruments used, patient population characteristics, and reported outcomes. A descriptive synthesis was compiled in Table 1. Additionally, 15 studies with quantitative data were analyzed using a forest plot to illustrate risk ratios (RR) and 95% confidence intervals (CI) for functional improvement. Risk of bias was assessed qualitatively based on methodological rigor, clarity of reporting, and validation of the outcome tools. Results: All included studies reported improvements in functional status following TKA. Most risk ratios ranged from 0.66 to 0.85, indicating a consistent reduction in the risk of postoperative functional limitation. High-quality studies demonstrated more precise effect estimates and greater internal validity. The SANE scale emerged as a valid and practical tool with high responsiveness, including in its culturally adapted Brazilian version. Despite heterogeneity in study design, the direction of effect remained consistent across all included studies. Conclusion: Validated functional assessment tools are essential for monitoring recovery after total knee arthroplasty. Instruments such as WOMAC and SANE demonstrate strong clinical utility and psychometric validity. Their systematic use enhances outcome comparability, supports individualized rehabilitation planning, and improves decision-making in orthopedic care.

Background: Scapulohumeral periarthritis commonly afflicts individuals in their middle age. Its etiology is multifaceted, and treatment presents a challenge with a high risk of recurrence. The main symptoms include shoulder pain and limited joint mobility, seriously affect the quality of life of the patients. Recent research indicate that acupuncture combined with bloodletting cupping can significantly improve the function of activity of shoulder joint and the pain in individuals with scapulohumeral periarthritis. However, these studies have typically been limited in scope, therefore additional research to substantiate the efficacy and safety of these intervention. Methods: To evaluate the efficacy of acupuncture combined with bloodletting cupping for treating patients with scapulohumeral periarthritis. We conducted an online search of databases in both Chinese and English, including PubMed, the Cochrane Library, Embase, Web of Science, CNKI, Wangfang Data, China Science and Technology Journal Database (VIP) and Chinese BioMedical Literature Database (CBM), to collect randomized controlled trials (RCTs) concerning the use of acupuncture combined with bloodletting cupping in scapulohumeral periarthritis patients. We also examined the references within the identified literature. Search utilised subject headings and free-text terms in both languages, without racial restrictions, for records up to April 3, 2024. Two researchers independently screened the literature, extracted data, and evaluated their qualities. RevMan 5.3 software was used for meta-analysis of the included studies. The protocol of this review was recorded in the International Platform of Registered Systematic Review and Meta-analysis Protocols (PROSPERO). Its registration number is CRD42023454614. Results: This review incorporated 22 RCTs involving a total of 1,774 patients. The results of meta-analysis showed that the clinical effective rate (RR=1.25, 95%CI [1.20, 1.30], P＜0.00001) of treating scapulohumeral periarthritis with acupuncture combined with bloodletting cupping was higher in the experimental group than in the control group. The all of Visual Analogue Scale (VAS) score (MD=-1.70, 95% CI [-2.17, -1.22], P＜0.00001). Melle score (SMD=-2.45, 95% CI [-2.55, -2.34], P=0.007]) and recurrence rate (RR=0.23, 95% CI [0.07, 0.77], P=0.02) were lower in the experimental group than in the control group with statistical significance (P<0.05). Conclusion: The acupuncture combined with bloodletting cupping for the treatment of shoulder impingement syndrome demonstrates definite efficacy and safety, with superior clinical effectiveness, pain relief, improvement in shoulder joint mobility, and reduction in recurrence compared to acupuncture alone. Therefore, it is worthy of being promoted and applied clinically.

The integration of LiDAR and Artificial Intelligence (AI) has revolutionized feature detection in urban environments. LiDAR systems, which utilize pulsed laser emissions and reflection measurements, produce detailed 3D maps of urban landscapes. When combined with AI, this data enables accurate identification of urban features such as buildings, green spaces, and infrastructure. This synergy is crucial for enhancing urban development, environmental monitoring, and advancing smart city governance. LiDAR, known for its high-resolution 3D data capture capabilities, paired with AI, particularly deep learning algorithms, facilitates advanced analysis and interpretation of urban areas. This combination supports precise mapping, real-time monitoring, and predictive modeling of urban growth and infrastructure. For instance, AI can process LiDAR data to identify patterns and anomalies, aiding in traffic management, environmental oversight, and infrastructure maintenance. These advancements not only improve urban living conditions but also contribute to sustainable development by optimizing resource use and reducing environmental impacts. Furthermore, AI-enhanced LiDAR is pivotal in advancing autonomous navigation and sophisticated spatial analysis, marking a significant step forward in urban management and evaluation. The reviewed paper highlights the geometric properties of LiDAR data, derived from spatial point positioning, and underscores the effectiveness of machine learning algorithms in object extraction from point clouds. The study also covers concepts related to LiDAR imaging, feature selection methods, and the identification of outliers in LiDAR point clouds. Findings demonstrate that AI algorithms, especially deep learning models, excel in analyzing high-resolution 3D LiDAR data for accurate urban feature identification and classification. These models leverage extensive datasets to detect patterns and anomalies, improving the detection of buildings, roads, vegetation, and other elements. Automating feature extraction with AI minimizes the need for manual analysis, thereby enhancing urban planning and management efficiency. Additionally, AI methods continually improve with more data, leading to increasingly precise feature detection. The results indicate that the pulse emitted by continuous wave LiDAR sensors changes when encountering obstacles, causing discrepancies in measured physical parameters.

Background: The study of phenolic compounds and their potential to contribute to health is a major interest in research. This work was to determine phenolic compound contents as well as antioxidant properties of roasted maize-peanut snack product with and without spices. Methods: HPLC was used to determine the phenolic composition of the maize flours, peanut flour and their composite snacks with and without spices. Total phenolic content (TPC), total flavonoid content (TFC), tannin content (TC) and radical scavenging activity (measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2-azino-bis (3- ethylbenzothiazoline-6-sulphonicacid) (ABTS) and hydrogen peroxide radical scavenging assays was also used. Results: TPC of the extract of roasted maize flour, roasted peanut flour and composite roasted maize-peanut flour ranged from 48.93 to 178.31 mg GAE/100 g, while the TFC was 3.18–25.94 mg CE/100 g and TC (0.22 – 0.73 mg CE/g). The dominant phenolic acid was protocatechuic acid ranged from 13.73 to 1643.54 µg/g. Among the flavonoids, quercetin and catechin were dominant. The extracts of the free soluble fraction exhibited 23.88 – 81.52 %, 49.59 – 85.17 % and 0.58 -5.13 µmol AAE/g of DPPH, hydrogen peroxide and ABTS radical scavenging abilities respectively. Conclusion: Maize–peanut product showed potential ability in contributing to alleviating radical induced oxidative stress.

This work evaluated the bioremediation potential of Jatropha tanjorensis leaf extract at different masses (250g, 500g and 750g) over a 40-day period. To achieve this, crude oil contamination of sandy loam soil was stimulated in twelve plastic reactors containing fixed masses of soil (4kg each) of topsoil homogenized with 500g of Bonny light crude oil. The Jatropha tanjorensis leaves were cultivated, rinsed with distilled water, blended, and purified by filtration. The leaf extract was applied at the stated concentrations including a control reactor (without leaf extract). The plastics reactors were kept in an open air shielded away from rainfall. The physicochemical characteristics determined were particle size distribution (PSD), potential of hydrogen (pH), electrical conductivity (EC), organic matter (OM), organic carbon (OC), selected heavy metals (Cr, Cd, Zn, Pb) and sample management were all in line with standard procedure. After 40 days of treatment, results obtained showed that plastic reactor with 750g of leaf extract produced the highest amount of cadmium reduction of 97% (from an initial of and there was significant difference among treatment (P < 0.05). The sequence of reduction among treatment was 750g > 500g > 250g of the leaf extract. Chromium, Lead and zinc followed similar trend. Thus, the Jatropha tanjorensis leaf extract has the potential to ameliorate crude oil-contaminated soil.

The price of grains like maize and sorghum is subject to significant fluctuations, which can have a significant impact on a country's economy and food security. The aim of the study is to model sorghum and maize price volatility in Nigeria. The data utilized in the study was extracted from World Bank Commodity Price Data (WBCPD), 2022. The data consists of monthly prices in nominal US dollars for maize and sorghum from January 1960 – August 2022. The Autoregressive Conditional Heteroskedasticity (ARCH) and Generalized Autoregressive Conditional Heteroskedasticity (GARCH) models were utilized for capturing the two-grain price volatility. Two types of conditional heteroscedastic models exist, the first group uses exact functions to control the evolution of , while the second group describes with stochastic equations. It is inferred from the result that inherent uncertainties and fluctuations existed in the prices of maize and sorghum in Nigeria which implies that the price volatility is positive and statistically significant suggesting that historical information and past shocks play a crucial role in determining the volatility observed in the grains. It is recommended that the ARCH, GARCH, EGARCH, TGARCH, PARCH, CGARCH, and IGARCH models should be employed for modeling and managing the volatility of maize and sorghum prices in Nigeria. These models have shown effectiveness in capturing different aspects of volatility, including the impact of past shocks, conditional volatility, asymmetry, and other relevant factors.

The accurate estimation of Individual Wave Components (IWC) is crucial for automated diagnosis of the human digestive system in a clinical setting. However, this process can be challenging due to signal contamination by other signal sources in the body, such as the lungs and heart, as well as environmental noise. To address this issue, various denoising techniques are commonly employed in bowel sound signal processing. While denoising is important, it can increase computational complexity, making it challenging for portable devices. Therefore, signal processing algorithms often require a trade-off between fidelity and computational complexity. This study aims to evaluate an IWC parameter extraction algorithm that was previously developed and reconstruct the IWC without denoising using synthetic and clinical data. To that end, the role of a reliable model in creating synthetic data is paramount. The rigorous testing of the algorithm is limited by the availability of quality and quantity recorded data. To overcome this challenge, a mathematical model has been proposed to generate synthetic bowel sound data that can be used to test new algorithms. The proposed algorithm’s robust performance is evaluated using both synthetic and clinically recorded data. We perform time-frequency analysis of original and reconstructed bowel sound signals in various digestive system states and characterize the performance using Monte Carlo simulation when denoising is not applied. Overall, our study presents a promising algorithm for accurate IWC estimation that can be useful for predicting anomalies in the digestive system.

Background: The COVID-19 pandemic disrupted routine osteoporosis care due to clinic closures and limited in-person consultations. Telehealth emerged as an alternative model enabling remote care delivery and monitoring. However, previous reviews on telehealth either did not include the pandemic period or had a limited focus in scope. Evidence synthesized specifically for osteoporosis care during the pandemic is needed but lacking. Methods: We systematically searched PubMed, MEDLINE, EMBASE, PsycINFO, Web of Science, and CINAHL for studies on telehealth for osteoporosis published between January 2021 and March 2023. Five studies met the inclusion criteria of: osteoporosis population, telehealth intervention, and COVID-19 pandemic timeframe. Data was extracted on study characteristics, COVID-19 outcomes, osteoporosis status, telehealth purpose, patient satisfaction, and clinical outcomes. Result: The five studies showed telehealth was used for monitoring data, delivering test results, adjusting medications, and assessments. Osteoporosis prevalence among telehealth users ranged 30-100%. High patient satisfaction was reported with telehealth versus in-person care. No major differences occurred in medication delays or fractures between telehealth and in-person groups. Conclusion: This review found telehealth enables effective osteoporosis care and monitoring during the pandemic, with high patient and provider satisfaction. However, more robust randomized controlled trials are needed to establish stronger evidence around telehealth's impacts on clinical osteoporosis outcomes. Implications: Though promising, further high-quality studies will help clarify telehealth's role in improving osteoporosis care and outcomes. Findings inform guidelines on integrating telehealth into routine management. Evidence on user perspectives optimizes telehealth implementation policies.

Today, the presentation of a three-dimensional model of real-world features is very important and widely used and has attracted the attention of researchers in various fields, including surveying and spatial information systems, and those interested in the three-dimensional reconstruction of buildings. The building is the key part of the information in a three-dimensional city model, so extracting and modeling buildings from remote sensing data is an important step in building a digital model of a city. LiDAR technology due to its ability to map in all three modes of one-dimensional, two-dimensional, and three-dimensional is a suitable solution to provide hyperspectral and comprehensive images of the building in an urban environment. In this review article, a comprehensive review of the methods used in identifying buildings from the past to the present and appropriate solutions for the future is discussed.