Silver nanoparticles (Ag⁺NPs) contamination in the environment is a serious concern. This study investigated selected heavy metal (Ag⁺, Cd^2+, Cr²⁺ and Pb²⁺) concentrations at different sampling points to assess the risk to human health (infants, children, and adults). To do this, an enclosed area (laboratory) of 12.6 m X 8.5 m (107.1 m²) was clearly marked at different coded distances of S1, S2, S3, and S4 representing 2, 4, 6, and 8 m, while unpolluted atmosphere at 50 m away without Ag⁺NPs served as the control (S5). The silver fireworks were allowed to burn for an approximate 00h03m30s at each sampling points using a high-volume air sampler mounted at the Environmental Engineering Departmental Laboratory, Rivers State University, with windows and doors closed to simulate indoor conditions. Samples were digested using a mixture of analytical-grade nitric acid, analytical-grade hydrochloric acid and analyzed to evaluate the levels of heavy metals by atomic absorption spectrophotometry. The Ag⁺ result at S1 shows 30,000 µg/cm³, S2 was 29,000 µg/cm³, while S3 was 28000 µg/cm³ and then S4 was 13,000 µg/cm³. These results exceeded the permissible values of the United States National Ambient Air Concentration for rural, urban and industrial areas (0.0005, 0.004 and 0.6 µg/cm³, respectively). The result for the control (S5) (0.037 µg/cm³) was within the maximum allowable value. Results from other heavy metals such as Cd were 1000, 743, 401, 153, 0.001 µg/cm³, Cr was 5000, 4000, 3729, 2960, 0.002 µg/cm³, Pb was 0.048, 0.041, 0.035, 0.034 and 0.01, µg/cm³, respectively. However, higher values of Ag⁺, Cd, and Cr indicated a higher propensity for the metals to be toxic (bioavailable). In addition, the assessment of the potential health risk posed by these metals proved contaminated and harmful. Visitors recorded high values in exposure concentration (EC) and low values in average daily dose (ADD).

Foods rich in phytochemicals are well recognized for their role in the prevention of chronic disease development, in addition to fulfilling the nutrient requirements. However, different processing methods employed during preparation may affect their levels and functionality as they are sensitive to different processing parameters such as temperature and light. This study aimed to evaluate the effects of three common processing methods; boiling, fermentation, and drying (sun and solar drying, with and without blanching), on total phenolic content and total flavonoid content in cassava (Manhot esculenta Crantz), black jack (Bidens pilosa) and bitter lettuce leaves (Launaea cornuta) grown in Mkuranga District in the Eastern part of Tanzania. Total phenolic content and total flavonoid content were analyzed by using the spectrophotometric method with the use of Folin-Ciocalteu and Aluminum Chloride reagents, respectively. Total phenolic content ranged from 0.9±0.14 to 85.7 ± 0.56 mg Gallic Acid Equivalent (GAE)/100g and flavonoids ranged from 0.03±0.00 to 3.9±0.03 mg/100g across the treatments. Both parameters were adversely affected by fermentation and boiling, while solar and sun drying only reduced the flavonoid content. Results showed that direct solar and sun drying appear to be effective processing methods, for the retention and maintenance of total phenolic content in all samples while, none proved to be effective for flavonoid content.

A diagnosis of the current state of the crops is made regarding the control of weeds, use of pesticides, fungicides; with an assessment of the state of the plant covers in the crop, and its control by different types of herbicides, and we detected a high loss of biological diversity; and some of these compounds are mentioned due to their high toxicity. Similarly, the use of pesticides and fungicides is discussed due to their repercussions on health. In order to avoid the unhealthiness caused by the applications of these products, phytosanitary and educational control strategies are proposed; promoting the inspection of fruit and vegetable markets, and modifying the contents in higher professional and university education. To this end, we propose an active teaching methodology, through which the student acquires skills and responsibility for the use of chemical agents in agriculture, which serves to prevent the entry of these contaminants into the food chain. Of the different polluting chemical agents, in the case of herbicides we highlight Oxyfluorfen and Glyphosate with high toxicity and whose consumption is very high. In the case of pesticides and fungicides, among others are Organochlorine compounds, which have been detected in blood, and Carbon Tetrachloride and Chloroform, considered potent hepatotoxic and neurotoxic. The basic objective of this study is the awareness and acquisition of knowledge by future teachers about polluting agents, which will subsequently have an impact on society.

Practice guidelines recommend fixed combinations of calcipotriol, a topical vitamin D analogue, and betamethasone dipropionate, a high potency corticosteroid, as first line topical treatment for mild to moderate plaque psoriasis of the body and scalp. A new foaming lotion for treatment of Psoriasis was developed and patented by the Spanish Ministry of Industry, Trade and Tourism (Invention patent reference number 202030824). The foaming lotion is composed of clobetasol, papaverine hydrochloride, spironolactone, milk-peptide-complex and propylene glycol. Three cases with moderate Psoriasis aged 34, 36 and 66 years old were treated with our new foaming lotion for 7-8 days. The three patients reported important improvement in the itching sensations and remission of the scaled lesions. Before and after application of the new foaming lotion, Psoriasis Area Severity Index (PASI) scores improved in the first patient from 24.3 to 1.8, in the second patient from 26.1 to 1.8, and in the third patient from 27 to 1.8. Our results show the short-term effectiveness of the new foaming lotion in treating moderate and extensive Psoriasis. Long follow-up is needed to evaluate the remission period of Psoriasis and possible side effects of the new topical treatment.

This study investigated adolescent students‟ knowledge of sexually transmitted infections (STIs) in eastern region schools for the deaf in Ghana. A descriptive survey design was used for the study. The researchers used HIV- The knowledge Questionnaire to assess the knowledge of respondents on STIs. Stratified sampling and simple random sampling techniques were employed. Proportional representation was used to select a sample of ninety-five (95) adolescent students with deafness from JHS2 and JHS3 between the ages of 13 and 24 years. Data were analyzed descriptively into frequencies and percentages. The results of the study indicated that the students knew of some of the types of STIs such as Gonorrhea, Syphilis, and HIV/AIDS. They, however, had inadequate knowledge of STIs such as Hepatitis B and Chlamydia.

During the past few decades, many of the synthetic chemicals are able to produce nanoparticles and nanoclusters, although these chemicals primarily act as reducing and capping agents, they are very toxic and hazardous and make the nanoparticles biologically incompatible. Thus there is need for green chemistry that includes a clean, non-toxic and environmental friendly method of nanoparticles synthesis. Cobalt, iron and copper nanoparticles were synthesized using the stem-bark extract of khayasenegalensis (mahogany) where cobalt chloride (CoCl₂ 6H₂O), ferric chloride (FeCl₂), and copper sulphate (CuSO₄ H₂O) were used as the metal precursor respectively. The change in color from light brown to dark brown indicates the formation of cobalt nanoparticles, from light brown to dark green indicates the formation of copper nanoparticles and also the change in color from light brown to a dark color indicates formation of iron nanoparticles. The nanoparticles were further characterized using UV visible spectroscopy, FTIR, and SEM. The UV result for CoNPs showed the highest peak at 500nm and both FeNPs and CuNPs showed the highest peak at 300nm. The FTIR results for all the nanoparticles showed the presence of Alkaloids and triterpenes. Also the SEM result showed spherical granular, partially dispersed and monodispersed morphology for CoNPs, FeNPs and CuNPs respectively. Moreover, the antibacterial activity of the synthesized NPs when tested against two gram positive bacteria and two gram negative bacteria was evaluated and good results were obtained. The antifungal activity when tested against two fungi showed a very good result.

Polychlorinated biphenyls (PCBs) are important class of persist organic pollutants that were used as a component of paints especially in printings, as plastificator of plastics and insulating materials in transformers and capacitors, heat transfer fluids, additives in hydraulic fluids in vacuum and turbine pumps. There is always a need to establish reliable procedures for predicting the bioconcentration potential of chemicals from the knowledge of their molecular structure, or from readily measurable properties of the substance. Hence, correlation and prediction of biococentration factors (BCFs) based on λ_max and vibration frequencies of various bonds viz υ(C-H) and υ(C=C) of biphenyl and its fifty-seven derivatives have been made. For the study, the molecular modeling and geometry optimization of the PCBs have been performed on workspace program of CAChe Pro 5.04 software of Fujitsu using DFT method. UV-visible spectra for each compound were created by electron transition between molecular orbitals as electromagnetic radiation in the visible and ultraviolet (UV-visible) region is absorbed by the molecule. The energies of excited electronic states were computed quantum mechanically. IR spectra of transitions for each compound were created by coordinated motions of the atoms as electromagnetic radiation in the infrared region is absorbed by the molecule. The force necessary to distort the molecule was computed quantum mechanically from its equilibrium geometry and thus frequency of vibrational transitions was predicted. Project Leader Program associated with CAChe has been used for multiple linear regression (MLR) analysis using above spectroscopic data as independent variables and BCFs of PCBs as dependent variables. The reliability of correlation and predicting ability of the MLR equations (models) are judged by R², R²_adj, se, q²_L10O and F values. This study reflected clearly that UV and IR spectroscopic data can be used to predict BCFs of a large number of related compounds within limited time without any difficulty.

Effective infection control requires a close fit between the mask and face to minimize gaps. This study investigated whether surgical mask performance varies with face shape and mask size. Three facial models were 3D-printed using head-related transfer function data. Two mask sizes were tested on each model, and 3D measurements were taken at five facial points: the nose, cheeks, and chin to assess mask-to-face gaps. To simulate droplet emission, an aqueous sodium chloride solution was released from a pseudo-oral cavity in the models, and air leakage was measured using a mask-fitting tester. A two-way analysis of variance (ANOVA) was used to examine the effects of face and mask size on leakage. Small face models showed significantly higher leakage than medium and large ones (p < 0.001), and S-sized masks leaked more than M-sized masks regardless of face size (p = 0.038). Linear regression showed a positive correlation between chin gaps and leakage when using S-sized masks (p < 0.05). These results suggest that medium-sized masks offer better overall performance. However, for small faces, fit—especially at the chin, requires particular attention.

Central line-associated bloodstream infections (CLABSIs) are important hospital-acquired infections that are related to increased mortality in cardiac intensive care units (CICUs). To determine the risk factors for CLABSIs, a case-control study was conducted in the CICU of our hospital. Emergency surgery (odds ratio: 9.6, 95% confidence interval: 1.633-56.926) was the strongest risk factor comparing the case group (n=11) to the control group (n=22). In addition, the indwelling period was significantly longer in the case group than in the control group (median 9 days versus 7 days, p=0.004). An intervention for the insertion of central lines was then started, with 1) thorough use of chlorhexidine-impregnated dressings (also known as chlorhexidine patches, CHG patches) in the insertion of central lines before emergency surgery, and 2) exchange of the central line 7 days after emergency surgery. After the intervention, the CLABSI incidence rate decreased from 6.8 to 0.8/1,000 device-days. These data suggest the usefulness of CHG patches and the importance of the early exchange of central lines in the CICU in patients following emergency surgery.

Many attempts have been made to repurpose existing and approved drugs for the treatment of COVID-19 infection. This involves anti-malarial drugs such as hydroxychloroquine and chloroquine, which have been shown to be less successful than initially believed, with a substantial risk of often fatal complications and interactions. This also involves Remdesivir, which has been shown to decrease recovery time significantly in hospitalized patients. However, for patients who are not yet hospitalized, there is no currently accepted treatment. Treating patients before they need to be admitted or even prophylactically could greatly decrease the load on hospitals, protect healthcare workers and reduce the spread of COVID-19. An in-vitro study indicated that Ivermectin was dynamic against COVID-19-infected cell. Ivermectin has antimicrobial, antiviral, and anticancer, immunomodulatory properties. This drug could reduce the viral load in COVID-9 infected patients, with potential effect on disease progression and spread. Therefore, Ivermectin may be a therapeutic choice for treatment of COVID-19, however, there is still a lack of evidence-based studies to support ivermectin treatment of patients with COVID-19.

Groundwater geochemistry refers to the general chemical properties of water, particularly groundwater. Precipitation, volatilization, oxidation/reduction, sorption/partition, and complexation are processes involved in the distribution and fate of organic molecules in water. Determining hydrogeochemical facies is a great help for determining relationships and similarities among the chemistry of waters in an aquifer. This study focused on the coastal aquifer of Tripoli (Lebanon) with Mio-Quaternary age. It is considered as a confined aquifer and an important hydraulic reserve for domestic water use in the region. Recently, it underwent an urban development that leads to an increase in water demand causing a decrease in the piezometric level and a high-risk of deterioration to water quality through seawater intrusion and anthropic pollution. To understand the origin of mineralization and the mechanism of water hydro-chemistry variation and to provide a vision to underground water recharge, this study aims to analyze the hydrodynamic, piezometric, and geochemical characteristics of the coastal aquifer. The fluctuation of physicochemical parameters for cool and warm seasons has been studied and monitored for 16 coastal wells during April, May, and June 2020. Results were interpreted by using a statistical analysis called Principal Components Analysis (PCA). Cartographic of groundwater levels and concentrations for nitrate, chloride, sulphate ions, the ratio sulphate/chloride were determined by using SUFFER8 software. It can be noticed that the Mio-Quaternary formation at Tripoli consists of thick sedimentary sandstones and conglomerates with argillaceous roots, which provide significantly high permeability characteristics. It is mainly recharged from precipitations through karstic formations. Chemical analysis shows that bicarbonate ions (HCO₃^-), characterized by dissolution of carbonate rocks from geological upstream formations of Tripoli, means that the aquifer is subjected to intensive recharge of fresh water and snow melting making a hydrostatic equilibrium facing marine intrusion [1]. High contents of chloride and Sodium are due to anthropic contamination or seawater intrusion. However, Magnesium ion concentration assures this intrusion. Meanwhile, nitrates, sulfates and phosphorus high concentrations are related to wastewater leakage or agricultural activities [2].

The pandemic corona virus disease 19 (COVID-19), caused by (SARS-CoV-2) a single stranded-RNA virus, has been spread rapidly worldwide with high rate of morbidity and mortality. Few months after the spread of the pandemic, few medications have proven to be efficient in human clinical trials. Several antiviral drugs have been used outside the scope of their initial medical use, such as lopinavir, hydroxychloroquine or azithromycin. Recent researches were done to show the efficacy of ivermectin in reducing SARS-CoV-2 viral RNA within 2 days. The use of ivermectin in in vitro studies has proven its efficacy against Corona virus. Based on the potency of ivermectin in in vitro studies, various clinical trials including patients infected with COVID-19 have been started; most of them have not been completed yet. Since the way how the virus infects the cells in vitro and in vivo is different, a decisive comment about how the ivermectin could exactly be beneficial to the patients has not been proven yet. Nevertheless, if ivermectin is compared to the other therapeutic treatments available for COVID-19 management, ivermectin has proved to have leverage over them. New randomized controlled clinical trials to assess the effectiveness of ivermectin the management of COVID-19 are strongly and urgently needed.

Background: Food borne outbreaks have been associated with sourcing unsafe food. Therefore, the first preventative strategy should be to source safe food. Even if the sourced food is safe, measures need to be put in place to ensure that it remains safe during the transfer, storage, preparation and serving activities that follow. An understanding of the ship food supply and transfer chain will help to illustrate the points at which the food can become contaminated en route to the point of consumption. Objectives: The study was conducted in selected sea port in the core Niger Delta to assessed the microbiological quality of food served at different ship galley to crew and passengers and compered it to standard. Methods: Samples of food were taken from three (Port Harcourt Area one (PHSP), Warri (WSP) and Koko (KSP)) seaports within the South-South zone for laboratory analysis to uncover food spoilage microorganisms capable of causing disease outbreak among ship which could result to Trans border diseases. Eleven samples of different ready to eat food were collected from the locations, which included cooked rice; fried fish, irish potato porridge, vegetable soup, griki, pepper soup, fried irish potato, salad and bread were collected randomly. The samples were prepared and analyzed using standard procedures. Mean viable counts of aerobic and anaerobic bacteria were determined, ranging from (13×103cfu/g to 78×104 cfu/g) for ready to eat food. Results: Based on the finding KSP I, KSP J and KSP K food samples had the highest bacterial contamination on food while WSP F, WSP G and WSP H food samples had the least with the following isolates Salmonella spp, Nocardia spp, Shigella spp, Listeria spp, Bacillus cereus, Leuconostoc spp, Acinetobacter spp, Acetobacter spp, campylobacter spp, Clostridium spp and Vibrio spp which revealed that the isolates were susceptible to any of these antibiotics Septrin, Chloramphenicol, Gentamycin, Tarvid, Streptomycin, Reflacin, Augumetin, Ceporex, Nalidixic acid, Ampicillin, Ciproflox, Penicillin and Erythromycin. Conclusion: Thus, ships operators and regulatory body are expected to take all practicable measures to ensure that they do not receive unsafe or unsuitable food and maintain adequate food temperature at all time.

Background: From centuries of evolution, knowledge and technological progress for mankind to one day rediscover nature. Currently, the control of bacterial infections is becoming complex due to the concern of antibiotic resistance, which has been a significant global health problem. The aim was to determine and compare phytochemical constituents and in the in vitro evaluation of antimicrobial and antioxidant activities of aqueous, methanol, acetate, dichloromethane extracts from Cola acuminata nuts grown in the Nord Ubangi Province, DRC. Methods: The nuts of Cola acuminata were harvested in April 2016 at Yakoma city, Nord-Ubangi, DRC. The microscopic features of this species were performed in order to identify specific histological structures. Three bacterial strains notably Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 8739 and Pseudomonas aeroginosa ATCC 9027 were used for the assessment of the antibacterial activity. The qualitative and quantitative phytochemical screening were used for compound identification using different fractions and fractions which presented a good extraction yield was used for further analysis. The antioxidant activity was evaluated using ABTS and DPPH scavenging tests while the antibacterial activity was performed using the diffusion method. Findings: The micrography of C. acuminata revealed the presence of following histological elements of which: fibers, spiral vessels, trichomes, ovoid starch grains, sclerenchyma and the fragments of endosperm. Only the methanol and aqueous extracts presented a good extraction yield. The phytochemistry shows the presence of flavonoids, anthocyanins, terpenes, iridoids and tannins. All fractions showed IC₅₀ values lower than 10 µg/mL in the ABTS test and lower than 100 µg/mL in the DPPH test. The antibacterial activity of this plant was low against the three strains used. Conclusion: Seeing the potency of C. acuminata and different biological activities displayed, further analysis are required in order to identify and purify the active ingredients, to study the toxicity of cell lines in vitro, to perform the in vivo experiments and to test for other activities such as the anti-hypoglycemic and anti-inflammatory.

Essentiality of water sustain life, and a satisfactory supply must be readily available to promote health, prolong life expectancy and prevent diseases. This study assesses the sources and quality of drinking water in Piwoyi community of Federal Capital Territory, Abuja, Nigeria. Thirty-five (35) Boreholes and Two (2) Sachet water were identified sources of drinking water in Piwoyi Community. Six Samples (5 Boreholes and 1Sachet water) were selected at random and analyzed in the laboratory. The Physicochemical parameters examined include electrical conductivity (EC), pH, temperature, turbidity, dissolve oxygen (DO), chloride, total hardness, alkalinity, nitrate, calcium, magnesium, phosphate, phosphorous, sulphate, sodium, potassium, fluoride, bicarbonate, nitrate-nitrogen, nitrite, copper, iron and zinc; and Microbiological parameters include Coliforms, E-coli and Faecal Strep. The results of analysis shows significant concentration of physicochemical and microbiological parameters in the samples of water analyzed according to Nigerian Standard for Drinking Water Quality thereby makes the water unsafe for drinking. Drinking from these sources of water will pose serious health risk to the people of Piwoyi Community. Therefore, the study helps to identify the contaminated locations as well as assist to follow emerging remedial measures toward controlling the contamination source in the community. It also recommends continuous monitoring and enforcement of environmental violations, aggressive sensitization on water sanitation and hygiene; adequate purification of water at domestic level; and government support on potable water supply and establish reasonable management strategies for sustainable water quality protection toward protecting public health.

The Murray Darling Basin Authority (MDBA) currently has been using a discrete field sampling technique for water quality monitoring that is expensive, time consuming and may not adequately represent the spatial variability of water quality relative to the entire water body. A pilot project was executed to assess the effectiveness of using earth observation data, supported by archived field-based observations for quantitative estimation of Water Quality Parameters (WQP) and detection of algal blooms in the River Murray. The selected pilot study area includes a 100km stretch of the River Murray between the Hume Dam and Yarrawonga Weir. The time frame for the archived field samples was between November 2008 and March 2011, when major algal blooms were occurring in this stretch of the Murray River.Analysis of the 2009 data shows that waters in sites in the Murray River downstream of the Hume Dam to the Yarrawonga Weir show more temporal than spatial variability in Chl-a and PC levels. The Chl-a concentration is relatively less in the Yarrawonga Weir than in the Murray River. The scatter plot of PC vs. Turbidity suggests that PC is a more significant parameter for the detection of Cyanobacteria than Chl-a. The field data represents the temporal bio-optical variability across the 2009 algal bloom events by successfully capturing the co-variations among Chlorophyll-a, Chycocyanin and turbidity at pre, during and post bloom conditions. The methodology has proved that the usefulness of an integrated earth observation and field based WQP technique to accurately map algal bloom events. The long term MDBA RMWQMP data for the 2009 bloom event is found partially compatible to the NOW Pilot study data in that only the data for the Heywood site that was used together for testing the WQP monitoring technique. The incompatibility of the RMWQMP data downstream of Yarrawonga Weir may be due to differing techniques used for determining Chlorophyll. The 2010 data was suitable for testing the technique for complex spatial bio-optical variability during the peak of the bloom in a large water storage. Lack of Chlorophyll measurements in 2010 data poses challenges in interpreting the relationship of bio-optical variability with the spatial distributions of bio-optical parameters. As relational parameters are absent, local information and expert advice will be required to develop plausible assumptions between the Chlorophyll - Phycocyanin relationship. The field sampled data for the 2010 bloom event acquired from the Hume Dam was used for comparative investigation of both moderate resolution sensors (MODIS and MERIS) and high resolution sensors (TM/TM+). The 2009 bloom event field samples of sites in the Yarrawonga Weir was used as an input with MODIS and MERIS and the data from all the sites was applied with TM/TM+. This paper will present an integrated earth observation and field based WQP technique to accurately map algal bloom events, and discuss challenges for real time earth observation data initiatives and future collaborative projects.