The Mambaka watershed is extends between latitudes 1 3°45'E and 14°15'E and longitudes 7°16'N and 6°45'N. The geology, various tectonic and structural events that have affected the Adamawa Plateau in Cameroon make it rich in multi-substance mining. The objective of this study is to map rare earth (REE) geochemical anomalies in the sediments of the watershed streams west of Mambaka, and to trace their origins and geochemical processes. Predictive maps from inverse distance interpolations (IDW), factor analysis (F1) or principal component analysis (PCA) and hierarchical bottom-up classification maps provided a better understanding of the central tendency, distribution and dispersion of REE in the samples and in the study area, based on standard deviation and variance values that generated two factors F1 (Ho-Tm-Er-Yb-Lu-Dy-Tb-Gd-Eu-Sm) and F2 (Pr-Nd-Ce-La-Sm) representing 92.44% of the total cumulative variance. The ratios Ce/Ce* > 0.78 and Eu/Eu* > 1 demonstrate positive anomalies in Ce and Eu, and clear differentiation. The normalized concentrations used to calculate fractionation ratios show that the values for LaN/YbN (0.58 to 1.34), LaN/SmN (0.61 to 0.88) and LaN/LuN (0.62 to 1.43) suggest higher fractionation in SS09 and lower fractionation in SS01. Similarly, the ratios La/Lu (61.71 to 143.46), La/Yb (9.00 to 20.72), La/Sm (4.02 to 5.83) and La/ Lu (61.71 to 143.46) confirm these higher ratios in SS09 and lower in SS01. The REE in the study area comes from hydrothermal processes based on high lineament densities at sampling points in igneous rocks with a mean ∑REE value of between 174-219 ppm.

Objective: The knowledge, attitudes, and practices of SUA students about the use of plastics containing endocrine disruptors were investigated in this study. Methodology: A study with 150 participants was conducted to assess individuals' knowledge about endocrine disruptors, attitudes, and plastic use practices. Results: The findings indicate that the participants possessed an average degree of knowledge 50.2 ± 3.85 with the main emphasis of awareness being generic concepts rather than specific substances. Regarding the potential health impacts of endocrine-disrupting chemicals present in plastics, respondents' attitudes ranged from fair to positive, with a mean score of 3.5 ±0.09 indicating a fair attitude overall. Conclusion: It is important to practice polite behavior and increase public awareness of safe plastic disposal methods. Surprising only 38.0% of the participants mentioned that they refrain from heating their food in plastic containers to reduce their exposure to plastics. Students' practices revealed a notable dependence on plastic products despite their awareness of the concerns surrounding endocrine disruptors, as most of them reported using plastic water bottles, plastic cups, and plastic bags almost always. Additionally, only 20.7% of the respondents consistently implemented strategies to prevent exposure to endocrine-disrupting chemicals. Recommendation: The study recommended increasing the use of cleaner plastic substitutes and improving educational programs to convert information into practical actions. Policies that encourage environmentally friendly behavior and raise public awareness of safe plastic disposal techniques should be put into practice.

Foods rich in phytochemicals are well recognized for their role in the prevention of chronic disease development, in addition to fulfilling the nutrient requirements. However, different processing methods employed during preparation may affect their levels and functionality as they are sensitive to different processing parameters such as temperature and light. This study aimed to evaluate the effects of three common processing methods; boiling, fermentation, and drying (sun and solar drying, with and without blanching), on total phenolic content and total flavonoid content in cassava (Manhot esculenta Crantz), black jack (Bidens pilosa) and bitter lettuce leaves (Launaea cornuta) grown in Mkuranga District in the Eastern part of Tanzania. Total phenolic content and total flavonoid content were analyzed by using the spectrophotometric method with the use of Folin-Ciocalteu and Aluminum Chloride reagents, respectively. Total phenolic content ranged from 0.9±0.14 to 85.7 ± 0.56 mg Gallic Acid Equivalent (GAE)/100g and flavonoids ranged from 0.03±0.00 to 3.9±0.03 mg/100g across the treatments. Both parameters were adversely affected by fermentation and boiling, while solar and sun drying only reduced the flavonoid content. Results showed that direct solar and sun drying appear to be effective processing methods, for the retention and maintenance of total phenolic content in all samples while, none proved to be effective for flavonoid content.

A diagnosis of the current state of the crops is made regarding the control of weeds, use of pesticides, fungicides; with an assessment of the state of the plant covers in the crop, and its control by different types of herbicides, and we detected a high loss of biological diversity; and some of these compounds are mentioned due to their high toxicity. Similarly, the use of pesticides and fungicides is discussed due to their repercussions on health. In order to avoid the unhealthiness caused by the applications of these products, phytosanitary and educational control strategies are proposed; promoting the inspection of fruit and vegetable markets, and modifying the contents in higher professional and university education. To this end, we propose an active teaching methodology, through which the student acquires skills and responsibility for the use of chemical agents in agriculture, which serves to prevent the entry of these contaminants into the food chain. Of the different polluting chemical agents, in the case of herbicides we highlight Oxyfluorfen and Glyphosate with high toxicity and whose consumption is very high. In the case of pesticides and fungicides, among others are Organochlorine compounds, which have been detected in blood, and Carbon Tetrachloride and Chloroform, considered potent hepatotoxic and neurotoxic. The basic objective of this study is the awareness and acquisition of knowledge by future teachers about polluting agents, which will subsequently have an impact on society.

The banana (Musa spp.) is a tropical fruit with excellent sensory characteristics in terms of aroma, flavor and texture, consumed worldwide and exploited in most tropical countries. Green banana flour is rich in flavonoids, which protect the gastric mucosa, has a high content of resistant starch, which acts in the body as a dietary fiber and thus has health benefits, and is an alternative option for bakery products, reducing waste of both the peel and the pulp. The aim of this study was to develop bread formulations with partial substitution of wheat flour with green banana flour (FBV), thus increasing the nutritional, technological and sensory value. 4 formulations, (A), standard sample; (B), bread with 10% FBV; (C), bread with 15% FBV and (D), bread with 20% FBV. Physico-chemical quality was assessed in terms of moisture content by drying at 105ºC, ash by incineration, fat by the Soxhlet method, protein by the biuret method, carbohydrates by difference calculation and calorific value by sum calculation and sensory analysis by affective methods. The data was evaluated using the RStudio 4.2.1 DCC statistical package. There were no significant differences in moisture content, lipids and calorific value. Differences were evident in the ash and protein content. Sensory acceptance of the standard formulation was 82.22%. The results obtained show that green banana flour can be used as a partial substitute for wheat flour to produce breads with functional properties.

This work evaluated the bioremediation potential of Jatropha tanjorensis leaf extract at different masses (250g, 500g and 750g) over a 40-day period. To achieve this, crude oil contamination of sandy loam soil was stimulated in twelve plastic reactors containing fixed masses of soil (4kg each) of topsoil homogenized with 500g of Bonny light crude oil. The Jatropha tanjorensis leaves were cultivated, rinsed with distilled water, blended, and purified by filtration. The leaf extract was applied at the stated concentrations including a control reactor (without leaf extract). The plastics reactors were kept in an open air shielded away from rainfall. The physicochemical characteristics determined were particle size distribution (PSD), potential of hydrogen (pH), electrical conductivity (EC), organic matter (OM), organic carbon (OC), selected heavy metals (Cr, Cd, Zn, Pb) and sample management were all in line with standard procedure. After 40 days of treatment, results obtained showed that plastic reactor with 750g of leaf extract produced the highest amount of cadmium reduction of 97% (from an initial of and there was significant difference among treatment (P < 0.05). The sequence of reduction among treatment was 750g > 500g > 250g of the leaf extract. Chromium, Lead and zinc followed similar trend. Thus, the Jatropha tanjorensis leaf extract has the potential to ameliorate crude oil-contaminated soil.

Costus afer is a well-known medicinal plant abundant in the Niger Delta region of Nigeria. The successful growth of Costus afer plant on crude oil contaminated soil adds to the list of plants that has potential to get rid of harmful chemical compounds to save human life as well preserve the environment. This study investigates the remediation potential of Costus afer plant at different ages (7, 14, 21, 28, 35, and 42 days old) to decontaminate petroleum hydrocarbon-contaminated soil. To achieve this, contamination of sandy-loam soil was simulated by mixing T0.5, 1.0, and 1.5 L of Bonny-Light crude oil with 48 kg of the soil in three separate reactors to achieve conditions of low, medium, and high contamination, respectively. The reactor with medium-level contaminated soil served as the control. The plants were nursed and transplanted at the stated ages to each reactor except the control. Controlled irrigation was applied, and the setups were housed to shield them from rainfall. After 90 days of treatment, results showed that the 7 days old plants produced the highest amounts of total polycyclic aromatic hydrocarbon (TPAH) reduction of 99.71, 90.10, and 84.06 % in the soil with low, medium, and high contamination, respectively. Furthermore, the sequence of TPAH reduction by the plants was 14 days old > 21 days old > 28 days old > 35 days old > 42-days old. Thus, in addition to its medicinal value, Costus afer plant also has the potential to restore crude oil-contaminated soils.

Background: Prolonged decline in the ability of the kidney to regulate acid–base balance, eliminate waste products, and manage water homeostasis and entered chronic phase, toxic metabolic accumulates and erythropoietin secretion by the kidney is decreasing and causes hematological changes including decrease of HCT, MCV, RBCs and platelet counts. Hemodialysis became a practical treatment for kidney failure and is the most common method used to treat advanced and permanent kidney failure. Anemia is one of the most common complications in hemodialysis patients. Objectives: The study aimed to evaluate the prevalence of anemia among hemodialysis patients and investigate the variations of hematological parameters among anemic hemodialysis patients in the Tripoli region. Materials and Methods: The present study was conducted on 250 renal failure patients, attending Tripoli Center for dialysis and 100 normal healthy subjects. The study Ethical Committee of the medical centers and the Libyan Academy of graduate studies reviewed and approved the study design and patient consent statements were taken from each patient. Information's about the patients were recorded in a questionnaire. A blood sample of 5 ml was drawn by venous puncture from each normal healthy individual and hemodialysis patient. 2.5 ml of the blood sample was collected in K-EDTA tubes for the hematological examinations and another 2.5 ml of the blood sample was collected in a plain tubes for biochemical tests (serum urea, creatinine, and uric acid concentrations). The hematological parameters (RBCs count, Hb, HCT, MCV, MCH, MCHC, WBCs count, differential count of WBCs, and Platelets count) were determined using an automated hematology analyzer Sysmex (K- 4500) machine. The data were compared using GraphPad Prism version.9. The statistical significance of differences between groups was evaluated with the independent t-test. A P-value of <0.05 was considered significant for all statistical tests. Results: The results showed that the prevalence of anemia among hemodialysis patients was 89.8%. The degrees of anemia were 17% severe, 71.66% moderate, and 11.34% mild anemia. The types of anemia were 13.36% microcytic hypochromic, 82.59% normocytic hypochromic, and 4.05% macrocytic hypochromic anemia. RBCs, WBCs & platelets counts, Hct, MCHC, and Lymphocytes % showed a significant (P<0.01) decrease, and MCV was a significant (P<0.01) increase in the anemic hemodialysis patients compared with the healthy individuals. But, a significant (P<0.05) decrease in MCH was observed in the anemic hemodialysis patients when compared with the healthy individuals. A significant correlation was observed between RBCs and their indices with most of the hematological parameters. A significant (P<0.01) negative correlation was observed between serum urea with Hb, and RBCs count and Hct. While, a significant (P<0.01) positive correlation was recorded between uric acid with platelets count. A significant (P<0.05) positive correlation was observed between gender with platelets count, while, a significant negative correlation was recorded between gender with serum urea (P<0.01), creatinine, and uric acid, and Hb (P<0.05). A significant (P<0.01) negative correlation was observed between blood groups with serum uric acid. A significant (P<0.01) positive correlation was observed between durations of hemodialysis with RBCs count and Hb, while, a significant (P<0.05) negative correlation was recorded between durations of hemodialysis with body weight, and MCHC. Conclusion: It can be concluded that a higher prevalence of moderate, normocytic hypochromic anemia among hemodialysis patients. Also, results showed a significant variation in hematological parameters among the anemic hemodialysis patients. So, hemodialysis patients advice to examine the hematological parameters and treated from anemia if detected.

Klopman described the chemical reaction of metal ions and base ions in term of softness, E^‡_n and E^‡_m, respectively. By simple modification of known methods, Singh et al. made it applicable for neutral Lewis acids (transition metal salts) and bases (organic molecules) and also extended its application to biological systems for site selectivity and to explain reaction mechanism (markovnikov and anti-markovnikov rule), ligand-receptor interaction of testosterones, estrogens and tetrahydroimidazobenzodiazepinone. In this study effective atomic softness E^‡_n(eff) and E^‡_m(eff), and their change ΔE^‡_nm have been used for site selectivity and polar interaction between 51 peptidic HIV-1 protease inhibitors and receptor amino acids. ΔE^‡_nm values derived from drug-receptor interaction show that when one moiety on receptor behaves as nucleophile (O of valine amino acid) at the same time maximum electrophilic site of the drug (C-atom of the maximum E^‡_n(eff) value) orient itself to come close the respective site and make maximum interaction, while when another moiety on receptor behaves as electrophilic site (C of isoleucine amino acid), at the same time maximum nucleophilic site of the drug (O-atom of the maximum E^‡_m(eff) value) also orient itself to come close the respective site and make maximum interaction.

In this research work, we have applied “Lipinski’s RO5” for pharmacokinetics (PK) study and to predict the activity of peptidic HIV-1 protease inhibitors. Peptidic HIV-1-PRIs have been taken from literature with their observed biological activities (OBAs) in term of IC50. The logarithms of the inverse of IC50 have been used as biological end point o(log1/C) in the study. For calculation of physicochemical parameters, the molecular modeling and geometry optimization of all the derivatives have been carried out with CAChe Pro software using semiempirical PM3 method. Prediction of the biological activity of the inhibitors has shown that the best QSAR model is constructed from pharmacokinetic properties, molecular weight and hydrogen bond acceptor. This also proved that these properties play important role to describe the PKs of the drugs. On the basis of the derived models one can build up a theoretical basis to access the biological activity of the compounds of the same series.

During the past few decades, many of the synthetic chemicals are able to produce nanoparticles and nanoclusters, although these chemicals primarily act as reducing and capping agents, they are very toxic and hazardous and make the nanoparticles biologically incompatible. Thus there is need for green chemistry that includes a clean, non-toxic and environmental friendly method of nanoparticles synthesis. Cobalt, iron and copper nanoparticles were synthesized using the stem-bark extract of khayasenegalensis (mahogany) where cobalt chloride (CoCl₂ 6H₂O), ferric chloride (FeCl₂), and copper sulphate (CuSO₄ H₂O) were used as the metal precursor respectively. The change in color from light brown to dark brown indicates the formation of cobalt nanoparticles, from light brown to dark green indicates the formation of copper nanoparticles and also the change in color from light brown to a dark color indicates formation of iron nanoparticles. The nanoparticles were further characterized using UV visible spectroscopy, FTIR, and SEM. The UV result for CoNPs showed the highest peak at 500nm and both FeNPs and CuNPs showed the highest peak at 300nm. The FTIR results for all the nanoparticles showed the presence of Alkaloids and triterpenes. Also the SEM result showed spherical granular, partially dispersed and monodispersed morphology for CoNPs, FeNPs and CuNPs respectively. Moreover, the antibacterial activity of the synthesized NPs when tested against two gram positive bacteria and two gram negative bacteria was evaluated and good results were obtained. The antifungal activity when tested against two fungi showed a very good result.

Triple negative breast carcinoma (TNBC) is a rapid progressive tumor and has a poor overall survival. Therefore, it is crucial to find out effective molecular targets and develop optimal therapeutic strategies for TNBC. In this study, immunohistochemical staining was used to detect expressions of programmed death-ligand 1 (PD-L1) and phosphatase and tensin homolog (PTEN) in 136 breast carcinomas including 50 TNBC. The effect of PTEN on regulation of PD-L1 expression was assessed in vitro in the PTEN knockdown TNBC cells. We found that PD-L1(SP142) positive rate in TNBC (48.0%) was significantly higher than non-TNBC (23.3%). PTEN negative rate was 42% in TNBC. The inverse correlation between PTEN and PD-L1(SP142) expression in TNBC was statistically significant (P<0.05). After PTEN knockdown, PD-L1 expression in TNBC cells increased significantly, and the expression level of AKT increased simultaneously. PTEN knockdown promoted cell proliferation, viability and G1/S switch of TNBC cells. These results suggested that PTEN may involve in regulation of PD-L1 expression, because PTEN loss can upregulate PD-L1 expression in TNBC. Antitumor immunity of PD-L1 could be enhanced in TNBC when targeting PTEN at the same time.

Polychlorinated biphenyls (PCBs) are important class of persist organic pollutants that were used as a component of paints especially in printings, as plastificator of plastics and insulating materials in transformers and capacitors, heat transfer fluids, additives in hydraulic fluids in vacuum and turbine pumps. There is always a need to establish reliable procedures for predicting the bioconcentration potential of chemicals from the knowledge of their molecular structure, or from readily measurable properties of the substance. Hence, correlation and prediction of biococentration factors (BCFs) based on λ_max and vibration frequencies of various bonds viz υ(C-H) and υ(C=C) of biphenyl and its fifty-seven derivatives have been made. For the study, the molecular modeling and geometry optimization of the PCBs have been performed on workspace program of CAChe Pro 5.04 software of Fujitsu using DFT method. UV-visible spectra for each compound were created by electron transition between molecular orbitals as electromagnetic radiation in the visible and ultraviolet (UV-visible) region is absorbed by the molecule. The energies of excited electronic states were computed quantum mechanically. IR spectra of transitions for each compound were created by coordinated motions of the atoms as electromagnetic radiation in the infrared region is absorbed by the molecule. The force necessary to distort the molecule was computed quantum mechanically from its equilibrium geometry and thus frequency of vibrational transitions was predicted. Project Leader Program associated with CAChe has been used for multiple linear regression (MLR) analysis using above spectroscopic data as independent variables and BCFs of PCBs as dependent variables. The reliability of correlation and predicting ability of the MLR equations (models) are judged by R², R²_adj, se, q²_L10O and F values. This study reflected clearly that UV and IR spectroscopic data can be used to predict BCFs of a large number of related compounds within limited time without any difficulty.

Nodal marginal zone lymphomas are indolent and rare non-Hodgkin lymphomas, most often diagnosed at an advanced stage. Their clinical presentations are typically insidious, which can lead to delayed diagnosis. The concomitant secretion of IgM and IgG immunoglobulins with kappa light chains constitutes an exceptional feature in this type of lymphoma, as illustrated by our case. We report the case of a 62-year-old man with a history of treated syphilis and inferior vena cava thrombosis managed with rivaroxaban, who presented with a left inguinal mass evolving over three months, accompanied by fever, night sweats, and weight loss. Clinical examination revealed non-inflammatory left inguinal lymphadenopathy without other abnormalities. Laboratory tests showed non-regenerative anemia, leukopenia, and elevated LDH levels. Protein electrophoresis revealed a monoclonal peak in the gamma region, confirmed by serum immunofixation showing two monoclonal bands of IgG kappa and IgM kappa types. Biopsy of the inguinal lymph node revealed histological and immunohistochemical features consistent with a small B-cell marginal zone lymphoma, staged as IV based on the extension workup. A chemotherapy regimen consisting of rituximab, cyclophosphamide, doxorubicin, vincristine, and prednisone (R-CHOP) was initiated, resulting in a partial response after four cycles. The coexpression of IgM and IgG kappa light chains in nodal marginal zone lymphomas, which are already rare, is an unusual finding. This particularity warrants multicenter studies to better assess its diagnostic, prognostic, and therapeutic implications.

Active Pharmaceutical Ingredients (APIs) serve as the cornerstone of pharmaceutical development, driving therapeutic efficacy and safety in drug formulations. This article provides a comprehensive overview of the lifecycle of APIs, starting from their discovery and development, through to manufacturing processes and regulatory oversight. The development of APIs begins with intensive research and discovery efforts, where medicinal chemists and pharmacologists identify and optimize potential compounds through computational modelling, high-throughput screening, and structure-activity relationship studies. Promising candidates undergo rigorous preclinical testing to assess pharmacological properties, safety profiles, and potential adverse effects in animal models. Upon successful preclinical outcomes, APIs progress to clinical trials, involving phases of testing in human subjects to evaluate efficacy, dosage regimens, and safety profiles under controlled conditions. Clinical trial data are meticulously analyzed to support regulatory submissions, demonstrating the API's therapeutic benefits and safety for eventual patient use. Manufacturing APIs involves complex chemical synthesis or biotechnological methods, ensuring precise control over reaction conditions, purity, and yield. The scale-up from laboratory synthesis to industrial production demands adherence to Good Manufacturing Practices (GMP), where stringent quality control measures verify consistency, potency, and stability throughout production batches. Regulatory oversight by authorities such as the Food and Drug Administration (FDA) in the United States and the European Medicines Agency (EMA) in Europe ensures that APIs meet stringent standards of safety, efficacy, and quality before market approval. Manufacturers must submit comprehensive Chemistry, Manufacturing, and Controls (CMC) data, detailing manufacturing processes, analytical methods, and stability studies to support regulatory filings.

Active Pharmaceutical Ingredients (APIs) form the backbone of pharmaceutical formulations, influencing their efficacy, safety, and stability. Essence control of APIs involves stringent regulation and optimization of their chemical, physical, and biological properties to ensure consistent quality and therapeutic outcomes. This manuscript explores the critical aspects of essence control in APIs, including synthesis, characterization, quality assessment, and regulatory considerations. The synthesis of Active Pharmaceutical Ingredients is a pivotal stage in pharmaceutical manufacturing, where precise control over chemical reactions and process conditions is paramount to achieving high-quality, safe, and effective medicines. Advances in synthetic methodologies, optimization strategies, sustainability practices, and the implementation of PAT technologies continue to drive innovation in API synthesis, supporting the development of novel therapeutic agents and enhancing pharmaceutical manufacturing efficiency.

Tanga City is the region with several micro-and small-scale pasta processing companies in the country. Therefore, the purpose of this study was to assess the quality and safety of folded vermicelli produced by the small-scale processors in Tanzania. Samples of 1 kg folded vermicelli were collected from 14 processing companies, by the intentional cluster sampling technique. The samples were analysed for aflatoxin and microbiological (Escherichia coli, Aspergillus flavus, and Aspergillus parasiticus) quality. Moreover, physico-chemical quality was assessed in terms of diameter by using a digital calliper, moisture content by oven-drying method at 110℃± 5℃, breaking strength by the texture analyzer, and colour by colourimeter (Chroma Meter CR-400) of the collected samples were determined. In terms of microbial quality, the results indicated contamination by E. coli (1.25-3.00 Log CFU.g^-1 in 8/14 samples), A. flavus (2.23-2.83 Log CFU.g^-1 in 12/14 samples), and A. parasiticus (1.22-2.75 Log CFU.g^-1 in 2/14 samples) as they are beyond the set limits. The diameter varied between 0.90 mm to 1.73 mm in 9/14 samples and moisture content were 10.61% to 12.65% in 13/14 samples, being within the established parameters. The samples indicated low breaking strength with levels between 6.79x10⁵ N.m^-2 to 3.75x10⁶ N.m^-2 in 11/14 samples. The result of brightness (L*) were between 53.03 to 72.14 and yellowness (b*) between 13.68 to 19.48 indices, indicating that there was no significant difference at the 5% level, respectively, although 2/14 samples had red (a*) colour values (-1.32 – +0.56). However, 4/14 samples were detected with aflatoxin B₁ (0.60-0.70 μg.kg^-1), they are within the recommended level (5 μg.kg^-1). The study underscores the need for concerted efforts to enhance production and hygiene practices to ensure consistent compliance with quality and safety standards.

Thanks to their interesting mechanical properties, recyclability and low production costs, plant fiber-reinforced composites, derived from agricultural residues, are of particular interest to both manufacturers and scientists looking to incorporate new environmentally-friendly and biodegradable materials to replace synthetic fibers, particularly glass fibers. The growing use of these composites in fields such as the automotive, construction and building industries, and soon in aeronautics, raises concerns about the reliability of the structures with which they are manufactured. This reliability must be guaranteed at the design stage, by a good knowledge of the properties of the material used. In this case, for composites, it is necessary to know the mechanical properties of their constituents, fibers and matrix, etc. In this context, this paper focuses firstly on the economic and industrial recovery of Kenaf (K) and Date Palm (DP) fibers, and secondly on their incorporation as a reinforcing element in cementitious matrix composites, for subsequent use in non-structural applications. This research highlights the development of cementitious matrix bio-composites reinforced with this type of fiber, based on Taguchi's statistical methodology, in order to minimize the cost and number of tests. The bio-composites developed are then mechanically characterized under static loading in compression and 3-point bending after a 30-day drying period.

The purpose of this study was to examine people’s knowledge base on Burkina beverages in Winneba in the Central Region of Ghana. The study employed a Mixed Sequential Explanatory research approach. The population for the study were dairy consumers living in Winneba. The Krejcie and Morgan table in 1970 was used to determine the 381 sample size of this study. The study employed the purposive, convenient and simple random sampling technique to select 100 out of 381 respondents for the study. The instrument employed in this study was a semi-structured interview guide to generate responses on people’s knowledge of “Burkina”. An Independent t-test was used to test the null hypothesis raised at a 0.05 level of significance. Based on the results of the study, it is concluded that respondents have substantial knowledge of “Burkina”. Street-sold “Burkina” can be modified using flavours and other cereals. Fresh milk must be pasteurized before using it for “Burkina”, well packaged, and sold in a hygienic condition. Certain factors such as packaging, environment, food safety, price, variation in thickness and flavours influence the rate of consumption of the “Burkina”. ‘‘Burkina’’ prepared with corn agglomerates had improved physicochemical attributes and health benefits. It is recommended that Food and Drug Authority representatives in winneba should regulate the “Burkina” samples on the Winneba market to ensure they are nutritious and, prepared and sold under hygienic conditions. There is the need also for Food and Drug Authority representatives in Winneba to ensure the standardization of the “Burkina” preparation to achieve a fair distribution of nutrients from all producers in Winneba and to ensure that the product meets standards before selling. Due to varying cereals, flavour options, good packaging, and pasteurization of the milk (fresh) and sold in a hygienic environment. It is again recommended that researchers develop ‘‘Burkina’’ with several flavour options and other cereals and test for consumer acceptability.